【英语版】国际标准 ISO 1304:1999 EN Rubber compounding ingredients — Carbon black — Determination of iodine adsorption number — Titrimetric method 橡胶配料成分 炭黑 碘吸附数的测定 滴定法.pdf
- 0
- 0
- 2024-08-09 发布于四川
-
正版发售
- 废止
- 已被废除、停止使用,并不再更新修订
- | 1999-03-25 颁布
- 1、本网站所提供的标准文本仅供个人学习、研究之用,未经授权,严禁复制、发行、汇编、翻译或网络传播等,侵权必究。
- 2、本网站所提供的标准均为PDF格式电子版文本(可阅读打印),因数字商品的特殊性,一经售出,不提供退换货服务。
- 3、标准文档要求电子版与印刷版保持一致,所以下载的文档中可能包含空白页,非文档质量问题
查看更多
ISO1304:1999ENRubbercompoundingingredients—Carbonblack—Determinationofiodineadsorptionnumber—Titrimetricmethod是关于橡胶配方成分中碳黑的碘吸附数测定的一种方法。碘吸附数是一种衡量碳黑在聚合物中分散性能的重要参数。该方法使用滴定技术进行测定,是一种标准化的、具有权威性的测试方法。
测试过程大致如下:
1.取一定量的碳黑样品,将其处理成一定浓度的溶液。
2.使用适当的化学试剂将溶液中的其它杂质去除,只保留碳黑与碘反应所需的碘化物。
3.使用滴定法测定与碳黑反应所需的碘化物的量,即碘吸附量。
4.根据碘吸附量与碳黑的质量,可以计算出碘吸附数。
该方法适用于各种类型的碳黑,具有较高的准确性和可靠性。通过测定碳黑的碘吸附数,可以更好地了解碳黑在橡胶中的分散性能,从而优化橡胶配方,提高橡胶的性能。
希望以上回答对您有所帮助。
您可能关注的文档
- 国际标准 ISO 12984:2000 EN 铝生产中使用的碳质材料 煅烧焦 粒度分布测定 Carbonaceous materials used in the production of aluminium — Calcined coke — Determination of particle size distribution.pdf
- 国际标准 ISO 12984:2000 EN Carbonaceous materials used in the production of aluminium — Calcined coke — Determination of particle size distribution 铝生产中使用的碳质材料 煅烧焦 粒度分布测定.pdf
- 国际标准 ISO 12985-1:2000 EN 铝生产中使用的碳质材料 焙烧阳极和阴极块 第1部分:使用尺寸法测定表观密度 Carbonaceous materials used in the production of aluminium — Baked anodes and cathode blocks — Part 1: Determination of apparent density using a dimensions method.pdf
- 国际标准 ISO 12985-1:2000 EN Carbonaceous materials used in the production of aluminium — Baked anodes and cathode blocks — Part 1: Determination of apparent density using a dimensions method 铝生产中使用的碳质材料 焙烧阳极和阴极块 第1部分:使用尺寸法测定表观密度.pdf
- 国际标准 ISO 12985-2:2000 EN 铝生产中使用的碳质材料 焙烧阳极和阴极块 第2部分:使用静水压法测定表观密度和开放孔隙度 Carbonaceous materials used in the production of aluminium — Baked anodes and cathode blocks — Part 2: Determination of apparent density and of open porosity using a hydrostat.pdf
- 国际标准 ISO 12985-2:2000 EN Carbonaceous materials used in the production of aluminium — Baked anodes and cathode blocks — Part 2: Determination of apparent density and of open porosity using a hydrostatic method 铝生产中使用的碳质材料 焙烧阳极和阴极块 第2部分:使用静水压法测定表.pdf
- 国际标准 ISO 12986-1:2000 EN 铝生产中使用的碳质材料 预焙阳极和阴极块 第1部分:用三点法测定弯曲/剪切强度 Carbonaceous materials used in the production of aluminium — Prebaked anodes and cathode blocks — Part 1: Determination of bending/shear strength by a three-point method.pdf
- 国际标准 ISO 12986-1:2000 EN Carbonaceous materials used in the production of aluminium — Prebaked anodes and cathode blocks — Part 1: Determination of bending/shear strength by a three-point method 铝生产中使用的碳质材料 预焙阳极和阴极块 第1部分:用三点法测定弯曲/剪切强度.pdf
- 国际标准 ISO 12986-2:2005 EN 铝生产中使用的碳质材料 预焙阳极和阴极块 第2部分:用四点法测定抗折强度 Carbonaceous materials used in the production of aluminium — Prebaked anodes and cathode blocks — Part 2: Determination of flexural strength by the four-point method.pdf
- 国际标准 ISO 12986-2:2005 EN Carbonaceous materials used in the production of aluminium — Prebaked anodes and cathode blocks — Part 2: Determination of flexural strength by the four-point method 铝生产中使用的碳质材料 预焙阳极和阴极块 第2部分:用四点法测定抗折强度.pdf
- 国际标准 ISO 1304:2006 EN 橡胶配料成分 炭黑 碘吸附数的测定 Rubber compounding ingredients — Carbon black — Determination of iodine adsorption number.pdf
- 国际标准 ISO 1304:2006 EN Rubber compounding ingredients — Carbon black — Determination of iodine adsorption number 橡胶配料成分 炭黑 碘吸附数的测定.pdf
- 国际标准 ISO 13041-1:2004 EN 数控车床和车削中心的测试条件 第1部分:带有水平工件夹持主轴的机床的几何测试 Test conditions for numerically controlled turning machines and turning centres — Part 1: Geometric tests for machines with a horizontal workholding spindle.pdf
- 国际标准 ISO 13041-1:2004 EN Test conditions for numerically controlled turning machines and turning centres — Part 1: Geometric tests for machines with a horizontal workholding spindle 数控车床和车削中心的测试条件 第1部分:带有水平工件夹持主轴的机床的几何测试.pdf
- 国际标准 ISO 13041-2:2008 EN 数控车床和车削中心的测试条件 第2部分:带有垂直工件夹持主轴的机床的几何测试 Test conditions for numerically controlled turning machines and turning centres — Part 2: Geometric tests for machines with a vertical workholding spindle.pdf
- 国际标准 ISO 13041-2:2008 EN Test conditions for numerically controlled turning machines and turning centres — Part 2: Geometric tests for machines with a vertical workholding spindle 数控车床和车削中心的测试条件 第2部分:带有垂直工件夹持主轴的机床的几何测试.pdf
- 国际标准 ISO 13041-5:2006 EN 数控车床和车削中心的测试条件 第5部分:进给、速度和插补的精度 Test conditions for numerically controlled turning machines and turning centres — Part 5: Accuracy of feeds, speeds and interpolations.pdf
- 国际标准 ISO 13041-5:2006 EN Test conditions for numerically controlled turning machines and turning centres — Part 5: Accuracy of feeds, speeds and interpolations 数控车床和车削中心的测试条件 第5部分:进给、速度和插补的精度.pdf
- 国际标准 ISO 13041-6:2005 EN 数控车床和车削中心的测试条件 第6部分:成品测试件的精度 Test conditions for numerically controlled turning machines and turning centres — Part 6: Accuracy of a finished test piece.pdf
- 国际标准 ISO 13041-6:2005 EN Test conditions for numerically controlled turning machines and turning centres — Part 6: Accuracy of a finished test piece 数控车床和车削中心的测试条件 第6部分:成品测试件的精度.pdf
文档评论(0)