【英语版】国际标准 ISO 1304:1985 EN 橡胶配料成分 炭黑 碘吸附数的测定 滴定法 Rubber compounding ingredients — Carbon black — Determination of iodine adsorption number — Titrimetric method.pdf
- 4
- 0
- 2024-08-09 发布于四川
-
正版发售
- 废止
- 已被废除、停止使用,并不再更新修订
- | 1985-08-08 颁布
- 1、本网站所提供的标准文本仅供个人学习、研究之用,未经授权,严禁复制、发行、汇编、翻译或网络传播等,侵权必究。
- 2、本网站所提供的标准均为PDF格式电子版文本(可阅读打印),因数字商品的特殊性,一经售出,不提供退换货服务。
- 3、标准文档要求电子版与印刷版保持一致,所以下载的文档中可能包含空白页,非文档质量问题
查看更多
ISO1304:1985ENRubbercompoundingingredients—Carbonblack—Determinationofiodineadsorptionnumber—Titrimetricmethod是关于橡胶配制原料中炭黑的碘吸附数测定的一种方法。
碘吸附数(iodineadsorptionnumber)是用来衡量炭黑在橡胶中的分散性和含量的一个重要参数。这个数值越大,炭黑在橡胶中的分散性越好,橡胶的耐磨性、抗拉强度等性能也会相应提高。
titrimetricmethod是一种滴定法,这是一种精确度高、准确度高的测量方法。在ISO1304:1985标准中,这种方法被用来测定炭黑的碘吸附数。具体步骤包括:
1.准确称取一定量的炭黑样品,用适当的溶剂溶解。
2.将溶解后的样品加入到滴定池中,加入一定量的过氧化氢等氧化剂,使炭黑氧化并释放出碘。
3.用硫代硫酸钠标准溶液滴定释放出的碘,根据滴定液消耗的体积,计算炭黑的碘吸附数。
需要注意的是,这个方法需要精确控制实验条件,如温度、压力、溶剂种类和浓度、氧化剂的用量等,以确保测量的准确性和可靠性。这个方法也适用于其他炭黑性能的测定,如体积电阻率、比表面积等。
您可能关注的文档
- 国际标准 ISO 12967-3:2009 EN 健康信息学 服务架构 第3部分:计算观点 Health informatics — Service architecture — Part 3: Computational viewpoint.pdf
- 国际标准 ISO 12967-3:2009 EN Health informatics — Service architecture — Part 3: Computational viewpoint 健康信息学 服务架构 第3部分:计算观点.pdf
- 国际标准 ISO 12984:2000 EN 铝生产中使用的碳质材料 煅烧焦 粒度分布测定 Carbonaceous materials used in the production of aluminium — Calcined coke — Determination of particle size distribution.pdf
- 国际标准 ISO 12984:2000 EN Carbonaceous materials used in the production of aluminium — Calcined coke — Determination of particle size distribution 铝生产中使用的碳质材料 煅烧焦 粒度分布测定.pdf
- 国际标准 ISO 12985-1:2000 EN 铝生产中使用的碳质材料 焙烧阳极和阴极块 第1部分:使用尺寸法测定表观密度 Carbonaceous materials used in the production of aluminium — Baked anodes and cathode blocks — Part 1: Determination of apparent density using a dimensions method.pdf
- 国际标准 ISO 12985-1:2000 EN Carbonaceous materials used in the production of aluminium — Baked anodes and cathode blocks — Part 1: Determination of apparent density using a dimensions method 铝生产中使用的碳质材料 焙烧阳极和阴极块 第1部分:使用尺寸法测定表观密度.pdf
- 国际标准 ISO 12985-2:2000 EN 铝生产中使用的碳质材料 焙烧阳极和阴极块 第2部分:使用静水压法测定表观密度和开放孔隙度 Carbonaceous materials used in the production of aluminium — Baked anodes and cathode blocks — Part 2: Determination of apparent density and of open porosity using a hydrostat.pdf
- 国际标准 ISO 12985-2:2000 EN Carbonaceous materials used in the production of aluminium — Baked anodes and cathode blocks — Part 2: Determination of apparent density and of open porosity using a hydrostatic method 铝生产中使用的碳质材料 焙烧阳极和阴极块 第2部分:使用静水压法测定表.pdf
- 国际标准 ISO 12986-1:2000 EN 铝生产中使用的碳质材料 预焙阳极和阴极块 第1部分:用三点法测定弯曲/剪切强度 Carbonaceous materials used in the production of aluminium — Prebaked anodes and cathode blocks — Part 1: Determination of bending/shear strength by a three-point method.pdf
- 国际标准 ISO 12986-1:2000 EN Carbonaceous materials used in the production of aluminium — Prebaked anodes and cathode blocks — Part 1: Determination of bending/shear strength by a three-point method 铝生产中使用的碳质材料 预焙阳极和阴极块 第1部分:用三点法测定弯曲/剪切强度.pdf
- 国际标准 ISO 1304:1985 EN Rubber compounding ingredients — Carbon black — Determination of iodine adsorption number — Titrimetric method 橡胶配料成分 炭黑 碘吸附数的测定 滴定法.pdf
- 国际标准 ISO 1304:1999 EN 橡胶配料成分 炭黑 碘吸附数的测定 滴定法 Rubber compounding ingredients — Carbon black — Determination of iodine adsorption number — Titrimetric method.pdf
- 国际标准 ISO 1304:1999 EN Rubber compounding ingredients — Carbon black — Determination of iodine adsorption number — Titrimetric method 橡胶配料成分 炭黑 碘吸附数的测定 滴定法.pdf
- 国际标准 ISO 1304:2006 EN 橡胶配料成分 炭黑 碘吸附数的测定 Rubber compounding ingredients — Carbon black — Determination of iodine adsorption number.pdf
- 国际标准 ISO 1304:2006 EN Rubber compounding ingredients — Carbon black — Determination of iodine adsorption number 橡胶配料成分 炭黑 碘吸附数的测定.pdf
- 国际标准 ISO 13041-1:2004 EN 数控车床和车削中心的测试条件 第1部分:带有水平工件夹持主轴的机床的几何测试 Test conditions for numerically controlled turning machines and turning centres — Part 1: Geometric tests for machines with a horizontal workholding spindle.pdf
- 国际标准 ISO 13041-1:2004 EN Test conditions for numerically controlled turning machines and turning centres — Part 1: Geometric tests for machines with a horizontal workholding spindle 数控车床和车削中心的测试条件 第1部分:带有水平工件夹持主轴的机床的几何测试.pdf
- 国际标准 ISO 13041-2:2008 EN 数控车床和车削中心的测试条件 第2部分:带有垂直工件夹持主轴的机床的几何测试 Test conditions for numerically controlled turning machines and turning centres — Part 2: Geometric tests for machines with a vertical workholding spindle.pdf
- 国际标准 ISO 13041-2:2008 EN Test conditions for numerically controlled turning machines and turning centres — Part 2: Geometric tests for machines with a vertical workholding spindle 数控车床和车削中心的测试条件 第2部分:带有垂直工件夹持主轴的机床的几何测试.pdf
- 国际标准 ISO 13041-5:2006 EN 数控车床和车削中心的测试条件 第5部分:进给、速度和插补的精度 Test conditions for numerically controlled turning machines and turning centres — Part 5: Accuracy of feeds, speeds and interpolations.pdf
文档评论(0)