- 3
- 0
- 2025-01-05 发布于四川
-
正版发售
- 废止
- 已被废除、停止使用,并不再更新修订
- | 1991-06-27 颁布
ISO4150:1991ENGreencoffee—Sizeanalysis—Manualsieving是关于绿色咖啡豆大小分析的手动筛选标准。
绿色咖啡豆的大小分析是咖啡豆处理过程中的一个重要步骤,它可以帮助了解咖啡豆的品质和均匀度。手动筛选是一种常用的方法,可以用于对绿色咖啡豆进行大小分类和筛选。
这个标准详细说明了如何进行手动筛选的过程,包括所需的工具、步骤、注意事项和标准。具体来说,它包括以下内容:
1.筛选工具:标准中列出了适合用于手动筛选绿色咖啡豆的工具,包括筛网、簸箕、容器等。
2.筛选步骤:标准详细描述了筛选的步骤,包括将绿色咖啡豆倒入筛网中、使用簸箕进行初步筛选、将较大的颗粒挑出、将较小的颗粒再次筛选等。
3.注意事项:标准中强调了筛选过程中的注意事项,如避免手部接触咖啡豆、注意筛网的清洁和更换、避免长时间暴露在阳光下等。
4.标准:标准中规定了筛选出的颗粒大小范围和相应的质量标准,以确保筛选出的绿色咖啡豆符合一定的品质要求。
这个标准为手动筛选绿色咖啡豆提供了详细的指导,包括工具、步骤、注意事项和标准,以确保筛选出的咖啡豆品质一致、均匀。
您可能关注的文档
- 国际标准 ISO 4141-4:2001 EN 道路车辆 多芯连接电缆 第4部分:盘绕电缆组件的铰接测试方法和要求 Road vehicles — Multi-core connecting cables — Part 4: Articulation test method and requirements for coiled cable assemblies.pdf
- 国际标准 ISO 4141-4:2001 EN Road vehicles — Multi-core connecting cables — Part 4: Articulation test method and requirements for coiled cable assemblies 道路车辆 多芯连接电缆 第4部分:盘绕电缆组件的铰接测试方法和要求.pdf
- 国际标准 ISO 4142:1997 EN 实验室玻璃器皿 试管和培养皿 Laboratory glassware — Test tubes and culture tubes.pdf
- 国际标准 ISO 4142:1997 EN Laboratory glassware — Test tubes and culture tubes 实验室玻璃器皿 试管和培养皿.pdf
- 国际标准 ISO 4144:1979 EN 不锈钢螺纹接头,符合 ISO 7-1 标准 Stainless steel fittings threaded to with ISO 7-1.pdf
- 国际标准 ISO 4144:1979 EN Stainless steel fittings threaded to with ISO 7-1 不锈钢螺纹接头,符合 ISO 7-1 标准.pdf
- 国际标准 ISO 4145:1979 EN 符合 ISO 7/1 标准的非合金钢螺纹接头 Non-alloy steel fittings threaded to ISO 7/1.pdf
- 国际标准 ISO 4145:1979 EN Non-alloy steel fittings threaded to ISO 7/1 符合 ISO 7/1 标准的非合金钢螺纹接头.pdf
- 国际标准 ISO 4146:1980 EN 造船业 内陆船舶 人孔 Shipbuilding — Inland vessels — Manholes.pdf
- 国际标准 ISO 4146:1980 EN Shipbuilding — Inland vessels — Manholes 造船业 内陆船舶 人孔.pdf
- 国际标准 ISO 4151:1978 EN 公路车辆 轻便摩托车 控制装置的类型、位置和功能 Road vehicles — Mopeds — Type, location and functions of controls.pdf
- 国际标准 ISO 4151:1978 EN Road vehicles — Mopeds — Type, location and functions of controls 公路车辆 轻便摩托车 控制装置的类型、位置和功能.pdf
- 国际标准 ISO 4151:1987 EN 公路车辆 轻便摩托车 控制装置的类型、位置和功能 Road vehicles — Mopeds — Type, location and functions of controls.pdf
- 国际标准 ISO 4151:1987 EN Road vehicles — Mopeds — Type, location and functions of controls 公路车辆 轻便摩托车 控制装置的类型、位置和功能.pdf
- 国际标准 ISO 4153:1981 EN 飞机—压力燃料分配系统—试验程序和截止冲击压力限值 Aircraft — Pressure fuel dispensing system — Test procedure and limit value for shut-off surge pressure.pdf
- 国际标准 ISO 4153:1981 EN Aircraft — Pressure fuel dispensing system — Test procedure and limit value for shut-off surge pressure 飞机—压力燃料分配系统—试验程序和截止冲击压力限值.pdf
- 国际标准 ISO 4156:1981 EN 直圆柱渐开线花键 公制模数,侧面配合 概述、尺寸和检验 Straight cylindrical involute splines — Metric module, side fit — Generalities, dimensions and inspection.pdf
- 国际标准 ISO 4156:1981 EN Straight cylindrical involute splines — Metric module, side fit — Generalities, dimensions and inspection 直圆柱渐开线花键 公制模数,侧面配合 概述、尺寸和检验.pdf
- 国际标准 ISO 4156:1981/AMD 1:1992 EN 直圆柱渐开线花键 公制模数,侧面配合 概述、尺寸和检验 修订 1:第 3 节:检查 Straight cylindrical involute splines — Metric module, side fit — Generalities, dimensions and inspection — Amendment 1: Section three: Inspection.pdf
- 国际标准 ISO 4156:1981/AMD 1:1992 EN Straight cylindrical involute splines — Metric module, side fit — Generalities, dimensions and inspection — Amendment 1: Section three: Inspection 直圆柱渐开线花键 公制模数,侧面配合 概述、尺寸和检验 修订 1:第 3 节:检查.pdf
原创力文档

文档评论(0)