步进距离对HVAF喷涂WC-10Co-4Cr涂层孔隙率和显微硬度的影响.pdfVIP

HotWorkingTechnology2019,Vol.48,No.8

步进距离对HVAF喷涂WC-10Co-4Cr

涂层孔隙率和显微硬度的影响

白冰张治民王江慧

,,

中北大学材料科学与工程学院山西太原

(,030051)

摘要：采用超音速火焰喷涂HVAF技术以WC-10Co-4Cr为原料，在7A04铝合金表面制备WC-10Co-4Cr耐磨

陶瓷涂层。通过扫描电镜对涂层形貌及孔隙率进行了研究，利用显微硬度仪对涂层硬度进行测量。通过以上实验分析了

不同步进距离对HVAF喷涂WC-10Co-4Cr涂层孔隙率的影响。结果表明，通过HVAF技术加工的WC-10Co-4Cr涂层

与7A04铝合金基材结合良好，且随步进距离的增加，涂层孔隙率随之增大，涂层硬度随之降低。

关键词：活性燃烧高速燃气火焰喷涂；涂层；孔隙率

WC

DOI:10.14158/j.cnki.1001-3814.2019.08.038

中图分类号：+文献标识码：文章编号：

TG174.442.4A1001-3814(2019)08-0154-03

EffectsofStepDistanceonPorosityandMicrohardness

ofHVAFSprayedWC-10Co-4CrCoating

BAIBing,ZHANGZhimin,WANGJianghui

(CollegeofMaterialsScienceandEngineering,NorthUniversityofChina,Taiyuan030051,China)

：

AbstractWC-10Co-4Crwear-resistantceramiccoatingwaspreparedonsurfaceof7A04aluminumalloybysupersonic

flamesprayingHVAFtechnologywithWC-10Co-4Crasrawmaterial.Themorphologyandporosityofthecoatingwere

studiedbyscanningelectronmicroscope,andthehardnessofthecoatingwasmeasuredbymicrohardnessinstrument.The

effectofstepdistanceontheporosityofHVAFsprayedWC-10Co-4Crcoatingwasanalyzedbytheaboveexperiments.The

resultsshowthat,theWC-10Co-4CrcoatingfabricatedbyHVAFtechnologycombineswellwiththe7A04aluminumalloy

substrate.Withtheincreaseofthestepdis