冷轧变形量对00Cr17Ni13Mo2N不锈钢组织和硬度的影响.pdfVIP

HotWorkingTechnology2

2023,Vol.52,No.5

冷轧变形量对00Cr17Ni13Mo2N不锈钢

组织和硬度的影响

刘波12，赵会娟，靳峰峰2

(1.太原理工大学机械与运载工程学院，山西太原030024;2.济源职业技术学院机电工程系，河南济源459000)

摘要：对固溶态00Cr17Ni13Mo2N不锈钢进行了不同变形量的冷轧试验，采用OM、XRD、硬度测试等研究了不同

冷轧变形量对不锈钢组织与硬度的影响。结果表明：固溶态00Cr17Ni13Mo2N钢组织为单一奥氏体组织。经不同变形量

冷轧后钢发生了形变诱导马氏体相变，随着冷轧变形量的增加，钢中α-马氏体体积分数逐渐增加，钢的硬度逐渐提高。轧

制变形量80%的钢中α马氏体体积分数达到了70.6%，硬度达到421HV，比固溶态试验钢硬度提高了152.1%。

关键词：00Cr17Ni13Mo2N不锈钢；冷轧变形量；显微组织；硬度

D0I:10.14158/ki.1001-3814

中图分类号：TG337.5;TG335.12文献标识码：A文章编号：1001-3814(2023)05-0108-03

EffectofColdRollingDeformationonMicrostructureandHardness

of00Cr17Ni13Mo2NStainlessSteel

LIUBol2,ZHAOHuijuan?,JINFengfeng?

(1.SchoolofMechanicalandTransportationEngineering,TaiyuanUniversityofTechnology,Taiyuan030024,China;

2.DepartmentofMechanicalandElectricalEngineering,JiyuanVocationalandTechnicalCollege,Jiyuan459000,China)

Abstract:Thesolidsoluted00Cr17Ni13Mo2Nstainlesssteelwassubjectedtocoldrollingtestswithdifferent

deformations.Theeffectsofcoldrollingdeformationonthemicrostructureandhardnessofthestainlesssteelwerestudiedby

OM,XRDandhardnesstest.Theresultsshowthatthesolidsoluted00Cr17Ni13Mo2Nsteelhasasingleaustenitic

microstructure.Deformationinducedmartensitictransformationoccursinthesteelaftercoldrollingwithdifferentdeformation.

Withtheincreaseofcoldrollingdeformation,thevolumefractionofa-martensiteinthesteelincreasesgradually,andthe

hardnessofthesteelincreasesgradually.Thevolumefractionofa-martensiteinthesteelwithrollingdeformationof80%

reaches70.6%,andthehardnessreaches421HV,whichis152