计量学基础.pdfVIP

MEAS 101: Metrology Basics Technical data is subject to change Copyright@2003 Agilent Technologies Printed on Dec. 4, 2002 5988-8491ENA 1 Agenda 1. Introduction 2. Definition of Terms Measurement, True Value, Bias, Measurement Error, Measurement System Variation, Test System Variation, Reproducibility, Repeatability and DUT (Device Under Test) Variation 3. Instrument Performance Accuracy, Precision Vs Accuracy, Uncertainty, Resolution, Sensitivity, Linearity, Stability and Standards 4. Decomposition of Measurement Variation 5. Measurement Results (Types) 6. Measurement Units Welcome to Agilent’s Metrology Basics module! In this self-paced module, you will get a summary of measurement processes, measurement terms, how results(what is meant here?) and an introduction to causes of uncertainty. Finally, we will have a quick glance at the different kind of units. This module is intended to provide a foundation for measurement technology. You will frequently run into many of the terms explained here, either when you use an instrument, or when you study other materials on this site. This module should take 20-30 minutes to study. 2 Metrology Basics 1 — Introduction