基于51单片机的电子钟C语言程序.doc

毕 业 设 计 论 文 基于51单片机的电子钟C语言程序#includereg51.h#includeabsacc.h#define uchar unsigned char#define uint unsigned int/*七段共阴管显示定义*/ uchar code dispcode[ ]={0x3F,0x06,0x5B,0x4F,0x66,0x6D,0x7D,0x07,0x7F,0x6F,??????????????????????? 0xBF,0x86,0xCB,0xCF,0xEF,0xED,0xFD,0x87,0xFF,0xDF};/*定义并初始化变量*/uchar seconde=0;uchar minite=0;uchar hour=12;uchar mstcnt=0; sbit P1_0=P1^0;???????????????? // second 调整定义sbit P1_1=P1^1;???????????????? //minite调整定义sbit P1_2=P1^2;???????????????? //hour调整定义 /*函数声明*/void delay(uchar k );????? //延时子程序void time_pro( );??? //时间处理子程序void display( );?????? //显示子程序void keyscan( );??????????????? //键盘扫描子程序 /*****************************//*延时子程序*//****************************/void delay (uchar k){uchar j;while((k--)!=0)?? {??? for(j=0;j125;j++)???? {;}?? }}???? /**************************//*时间处理子程序*//**************************/void time_pro( void){ ??????? if(seconde==60)??????????????????? //秒钟设为60进制????????? { seconde=0;??????????? minite++;?????????? if( minite==60)????????????? //分钟设为60进制????????????? { minite=0;??????????????? hour++;????????????? if(hour==24)????????????? //时钟设为24进制???????????????? {hour=0; }????????????? }????????? }??? }/*****************************//* 显示子程序*//*****************************/void display(void)??? {????? ??????? P2=0xfe;??????? P0=dispcode[hour/10];???????????????? //显示小时的十位??????? delay(4);??????? P2=0xfd;??????? P0=(dispcode[(hour%10)])|0X80;??????? //显示小时的个位??????? delay(4);??????? P2=0xfb;??????? P0=dispcode[minite/10];?????????????? //显示分的十位??????? delay(4);??????? P2=0xf7;??????? P0=(dispcode[minite%10])|0X80;??????? //显示分的个位??????? delay(4);??????? P2=0xef;??????? P0=dispcode[seconde/10];???????????? //显示秒的十位??????? delay(4);??????? P2=0xdf;??????? P0=dispcode[seconde%10];???????????? //显示秒的个位??????? delay(4);????? } /*******************************//*键盘扫描子程序*//*******************************/void keyscan (void){ ??? if(P1_0==0)??????????