可调直流稳压电源的设计.doc

摘 要 本文设计一直流稳压电源采用三端集成稳压器来实现直流电压连续可调数字电压显示部分采用该稳压电源具有性能稳定结构简单电压指标精度高调节方便等优点Abstract In this paper, the design is a regulated DC power supply. Adopted Transformer to change voltage, rectifier bridge rectifier circuit, capacitor ripple voltage on the filter, and finally with adjustable resistance and three-terminal voltage regulator integrated to achieve DC voltage between 2.5V to 25V continuously adjustable. Digital voltage display digital voltage meter, based in part on the design principle, the use of integration to complete the TC7107 analog signal to digital signal conversion and drive the digital display. Voltage is adopting a total of cathode a digital LED to display. The regulated power supply with stable performance, simple structure, voltages guide line has a high precision, the advantages of regulation and so on. Keyword: Bridge rectifier, Filtering, Regulators, Decoder, transformer, TC7107, Analog Signal, Digital Signal, Digital Display Tube. 目 录……...................................................................................3 二、方案论证与比较……...............................................................4 2．1方案—....................................................................................4 2．2方案二....................................................................................4 2．3方案论证与选择......................................................................5 三、单元模块电路方案设计............................................................6 3．1．2．1．．．17 八、参考文献....................................................................................18 九、附录............................................................................................19 一、前言 本次设计的是一直流稳压电源采用220V作为电源输出调整范围为2.5V25V，最大输出电流为1A从七十年代开始,我国集成稳压器的研制和生产得到了飞速地发展,现已能生产上百个品种,初步形成了完整的系列产品集成稳压器在较短时期内能够获得迅速发展和广泛应用,乃是基本它的通用性强的特点.因为不管是哪种电子设备,几乎毫无例外地都需应用直流稳压系统.随着电子设备功能日趋复杂和性能不断提高,设备内部所应用的各种元器件和组件也日益复杂化和多样化,而这些元器件和组件所要求的供电电压并不完全相同.这样,在电子设备中必须引入多种稳压电源系统才能满足需要.如果仍沿用过去由分离元器件组成的稳压电源系统.必将大大的增加电子设备的体积、重量和