课程设计（论文）—基于AT89s52单片机设计的电子秤原理及实现方法.docVIP

目录 摘要------------------------------------------------------------------------- 一、设计任务与要求----------------------------------------------------------- 1.1设计任务-------------------------------------------------------------- 1.2设计思路---------------------------------------------------------- 1.3技术指标------------------------------------------------------------- 1.3.1电子秤工作原理------------------------------------------------- 1.3.2电子秤的计量性能------------------------------------------------ 二、方案设计与论证---------------------------------------------------------- 2.1方案一--------------------------------------------------------------- 2.1方案二---------------------------------------------------------------- 三、电子元器件的选取--------------------------------------------------------- 3.1传感器的选择----------------------------------------------------------- 3.2运算放大器的选择---------------------------------------------------- 3.3模数转换(A/D)芯片的选取----------------------------------------------- 3.4液晶的选择----------------------------------------------------------- 四、各硬件模块的具体实现方案------------------------------------------------ 4.1电源模块------------------------------------------------------------- 4.1.1 电源原理.1.2 电源电路图 4.3.1仪表Abstract This article describes the design of AT89s52 microcontroller based electronic scale theory and implementation methods. The system consists of 51 single-chip microprocessor control improved version 52, the LCD displays that object automatically. Its components are measuring circuit, differential amplifiers, A/d conversion, the microcomputer control circuit, show circuit. The measuring circuit using resistance strain the weight of the device object into the appropriate signals to the size of the electrical signals through the differential amplifier will signal amplification to AD chip can identify scope so that they could be an electrical signal into a digital signal corresponding to the handle to the SCM in the LCD display that the weight of the object, the syst