毕业设计：EPM7128多功能系统(一)（终稿）.docVIP

天津职业技术师范大学 Tianjin University of Technology and Education 毕 业 设 计 专 业： 电子科学与技术 班级学号： 电科0601 – 07号 学生姓名： 呼楠 指导教师： 李雅静 讲师 二〇一〇年六月  天津职业技术师范大学本科生毕业设计 EPM7128多功能系统(一) multi-function system design based on EPM7128 Ⅰ 专业班级：电科0601班 学生姓名：呼楠 指导教师：李雅静 讲师 学 院：电子工程学院 2010 年 06 月 摘 要 应用Altera公司推出的CPLD：Max7000S系列的EPM7128SLC84-15芯片为主控制器，设计完成一个简易的EPM7128多功能系统，其硬件结构包括：BEEP模块、直流电机与步进电机驱动模块、七段数码管显示模块、按键及LED模块、红外通信模块、串行AD／DA模块、RS232串口通信。程序设计过程中，首先对每一部分编写一个简单的控制程序，可作为后来综合程序设计的底层程序。该系统除了可以实现输入／输出实验、LED数码管显示实验、蜂鸣器声响实验、频率计实验等基本的实验功能还可派生出键控灯、表决器、优先编码器和计时钟表可把已编译好的用户代码直接写入目标电路板上的CPLD芯片中,而不需要从电路板上取下CPLD芯片下载后直接调试，免去了调试时由于频繁地插入取出芯片对芯片和电路板带来的不便 关键词： CPLD；多功能；EDA 技术； ABSTRACT Application Altera company CPLD : EPM7128SLC84—15 chip of Max7000S series to be controller.Designing and completing a simple EPM7128 multifunctional system.It’s hardware structure includes:BEEP module, dc motor and stepping motor driver module, 7 digital display module, buttons and tube LED module, infrared communication module, serial AD/DA module and RS232 serial communication. During the design process, first of each part to write a simple control program, but as a comprehensive program design on the bottom of the later procedure. The system besides can realize the input/output experiment, LED digital display, buzzer sounds tube experiments, the frequency of experiment, experiment of basic experimental function can derive keying lamp, veter, priority encoder and timing clocks complex experiments. After completion of the system can already compiled code directly into target users on the boards, but not CPLD chip to remove from PCB CPLD chip. Download directly after commissioning, debugging due to frequent inserted to chip and remove chip board inconvenience, The multifunctional system is relatively low cost and can be used for students to learn autonomously EDA. The design is made by a team member and me.In this article mainly finish 5 modular circuit,such as Beep modular,the nixie dis