毕业设计论文—adams液压系统仿真.doc

1 Getting Started Using ADAMS/Hydraulics Overview Welcome to ADAMS/Hydraulics. ADAMS/Hydraulics is a plugin to ADAMS/View, ADAMS/Solver, ADAMS/Car, and ADAMS/Engine. ADAMS/Hydraulics is a plugin to ADAMS/View, ADAMS/Solver, ADAMS/Car, and ADAMS/Engine. It lets you model and simulate fluid-powered circuits and control how the circuits interact with mechanical models. ADAMS/Hydraulics contains all of the hydraulic components you need to model your hydraulic circuits: valves, pumps, cylinders, and so on. The components take advantage of the parameterization and function capabilities of ADAMS/View and ADAMS/Solver. The result is a powerful open environment for complete modeling of complex hydraulic-driven mechanisms and systems. Introducing ADAMS/Hydraulics 3 Introducing the Problem 5 Creating a Hydraulic Circuit 11 Testing Your Model 39 2 Getting Started Using ADAMS/Hydraulics Copyrigh The information in this document is furnished for informational use only, may be revised from time to time, and should not be construed as a commitment by MSC.Software Corporation. MSC.Software Corporation assumes no responsibility or liability for any errors or inaccuracies that may appear in this document. Copyright Information This document contains proprietary and copyrighted information. MSC.Software Corporation permits licensees of MSC.ADAMS?software products to print out or copy this document or portions thereof solely for internal use in connection with the licensed software. No part of this document may be copied for any other purpose or distributed or translated into any other language without the prior written permission of MSC.Software Corporation。 Copyright Trademarks ADAMS, EASY5, MSC, MSC., MSC.ADAMS, MSC.EASY5, and all product names in the MSC.ADAMS Product Line are trademarks or registered trademarks of MSC.Software Corporation and/or its subsidiaries. NASTRAN is a registered trademark of the National Aeronautics Space Administration. MSC.Nastran is