连铸坯枝晶间距检测方法的优化与应用.pdfVIP

连铸坯枝晶间距检测方法的优化与应用 隋晓红 李 平 赵宝纯 张鹏远 谢广群 （鞍钢股份技术中心, 鞍山 114009 ） 摘 要 本文介绍了连铸坯凝固组织中树枝晶间距的优化检测试验方法及铸坯枝晶间距参数与连铸二冷强度和铸 坯质量的关系。通过对连铸坯凝固冷却过程及其枝晶组织形态的分析，选定具有代表性的连铸坯一、二次枝晶组织 形成区域进行枝晶间距参数检测。由统计分析结果得出有效测量连铸坯枝晶间距的优化方法，将该方法应用于无缝 管圆坯连铸生产线的质量检验中，评价和推测连铸生产二冷工艺状况、调整工艺参数；大大提高了检测效率，为改 善铸坯凝固组织结构，减轻和消除连铸圆坯中间裂纹等缺陷起到了重要作用。 关键词 连铸坯 凝固 枝晶间距 测定 Optimization and Application of Measurement Method for Continuous Casting Slab Dendrite Arm Spacing Sui Xiaohong Li Ping Zhao Baochun Zhang Pengyuan Xie Guangqun (Anshan Iron and Steel (Grop) Co.，Anshan ,114009) 1 Abstract In this paper, the optimal detection method of the dendrite arm spacing in the solidification structure of the continuous casting slab is introduced and the relationship between the dendrite arm spacing parameters, the secondary cooling intensity during casting process and the quality of the continuous casting slab is also presented. By the analysis of the cooling process of the continuous casting slab and the pattern of the dendrite, the typical region where the primary dendrite arm spacing and secondary dendrite arm spacing in the continuous casting slab are determined. The optimal method to measure the continuous casting slab is obtained from the statistic analysis results. This method can be used to seamless pipe continuous casting slab production detection to evaluate and infer the secondary cooling process during continuous casting so that the parameters can be optimized and the detection efficiency can be improved greatly. Also, this method is very important to improve the solidification structure of the slab and reduce or eli