6t每h燃煤锅炉脱硫除尘一体化工程设计.docVIP

6t/h燃煤锅炉脱硫除尘一体化工程设计 摘 要 控制燃煤的途径有燃烧前脱硫燃烧中脱硫燃烧后烟气脱硫。目前烟气脱硫（Flue Gas Desulfurization，缩写为FGD）是世界上唯一大规模商业化应用的脱硫技术。世界各国致力于烟气脱硫研究的方法约200多种，但工业化应用的只有10多种，本论文选择以t/h燃煤锅炉为对象设计烟气脱硫工艺，在查阅文献和工程设计手册以及工程实践参数的基础上，进行工艺的选择和设计计算及设备选型。 在烟气脱硫系统中，吸收塔是核心装置[2]，烟气以逆流的方式通过塔体，增大了浆液与的接触面积，降低了所需的液气比，节约了动力费用，还减少了工艺用水量，除雾、吸收和氧化同时在一个塔内进行，有效减小了装置的体积和占地面积。 本设计在保证了脱硫系统可行性的同时，又保证了脱硫效率，使排放浓度达到了设计要求。 关键词： 燃煤锅炉烟气脱硫 Flue gas Dedust and Desulfurization Design for 6t/h boiler in Wenjiang industrial park Abstract There are many ways to control coal desulfurization before combustion, combustion desulfurization, flue gas desulfurization after combustion. At present, the FGD (flue gas desulfurization, the acronym for the FGD) is the worlds only large-scale commercial application of desulfurization technology.FGD countries in the world dedicated to research about more than 200 kinds of ways, but only 10 kinds of ways in industrial application. One more use of limestone-gypsum method, dual-alkali sodium alkali. However, due to limestone - gypsum, sodium alkali high economic cost, dual-alkali FGD process in the medium and small coal-fired boiler applications are widely promoted. In this paper, chosen to 6t / h coal-fired boiler flue gas desulfurization for the object design process, in the literature review and engineering design manual [1], as well as engineering practice parameters. Determined using dual-alkali design process of calculation and selection of equipment. In the flue gas desulfurization system, the tower is the core devices, One cyclone tower is commonly used in wet desulfurization equipment, which has a high load, low pressure drop, easy to plug and flexible width, etc., for fast absorption rate absorbent, and taking into account the status of implementation of the enterprise, decided to adopt the cyclone Plate as the desulfurization process of absorption equipment. Flue gas in order to counter-current manner through the tower and increase the size of the contact area with the to reduce t