本科生毕业论文（设计）.doc

本 科 生 毕 业 论 文（设计） 题目宽带RFIC收发芯片系统设计 姓名与学号董晶 3080101507 指导教师皇甫江涛 年级与专业2008级信息与通信工程 所在学院信息与电子工程学系 摘要3个方面对射频前端作出改进。随着移动通信对多种通信制式兼容的需要，迫切需要实现高兼容的新的宽带射频收发电路。 本文采用IC设计中广泛采用的CMOS工艺集成电路参数为基础，采用0.18微米工艺，从Cadence设计软件出发，通过原理图和版图的仿真分析方法分析优化电路参数，最终实现宽带L波段射频收发机模拟前端芯片的设计。 关键：The mobile communication is the most rapid developing field of the information industry. With the rapid development of the broadband business, mobilization and broadband have become the main goals of the communication and network technology. RF subsystem is the key part of mobile communication system and rf circuit is very important to the whole system structure and performance, which is the difficulty of the research and development of the communication system. The rapid development of the mobile communication puts forward more and more high requirements to the wireless receiver, such as low voltage, low power consumption, low price, high level of integration and high reliability and so on, which urge people to improve the RF circuit constantly from system structure, circuit technology and process. With the?mobile communication?needs of?a variety of communication?formats?compatible, there is an urgent?need to implement?new broadband?high-compatible?RF transceivercircuit. This paper bases on the CMOS technology widely used in the IC design with 0.18-micron process .From the Cadence design software, through the simulation analysis method of the schematic and layout to analyze the circuit parameter optimization, we finally realizes the design of RF analog front-end circuit of broad frequency range . Keywords: broadband RF Cadence 目录 第一章 引言 1 1.1背景 1 1.2已往的研究 1 1.3最新的研究成果 3 1.4本文的主要内容 4 第二章