51单片机简易计算器1.docVIP

51单片机简易计算器程序及原理图 因本人初学单片机程序过于简单请见谅 程序： #include reg51.h sbit P3_0=P3^0; sbit P3_1=P3^1; sbit P3_2=P3^2; sbit P3_3=P3^3; //端口的定义 Unsigned char code led_number[]={0x3f,0x06,0x5b,0x4f,0x66,0x6d,0x7d,0x07,0x7f,0x6f,0x77,0x7c,0x39,0x5e,0x79,0x71,0x00 }; //LED灯的数据 unsigned char m[5]={0}; unsigned char temp; unsigned char i; unsigned int u,k,n,s; unsigned int t[3]={0}; void clear(void) //对端口数据清零 { for(i=0;i4;i++) { m[i]=0; } } void weiyi(void) //端口数据位移函数 { for(i=4;i0;i--) { m[i]=m[i-1]; } } void dengyu(void) //等于号里面的运算 { switch(n) { case 1: k = u + t[0]; t[0] = k; break; case 2: k = t[0]-u; t[0] = k; break; case 3: k = t[0]*u; t[0] = k; break; case 4: k = t[0]/u; t[0] = k; break; } m[3]= t[0]/1000; m[2]= t[0]%1000/100; m[1]= t[0]%100/10; m[0]= t[0]%10; } void delay500us(unsigned char cnt) //延时函数 { unsigned char i; do { for(i=0;i60;i++); } while(--cnt); } void display(unsigned char led1,unsigned char led2,unsigned char led3,unsigned char led4) //数码管动态显示程序 { P2=0x00; P3=0XFF; P2=led_number[led1]; P3_3=0; delay500us(50); //每隔25毫秒扫描一个端口 P3=0XFF; P2=0x00; P2=led_number[led2]; P3_2=0; delay500us(50); //每隔25毫秒扫描一个端口 P3=0XFF; P2=0x00; P2=led_number[led3]; P3_1=0; delay500us(50); //每隔25毫秒扫描一个端口 P2=0x00; P3=0XFF; P2=led_number[led4]; P3_0=0; //每隔25毫秒扫描一个端口 delay500us(50); P3=0XFF; //端口关闭 } void main() //主程序 { while(1) { P1=0xf0; temp=P1; if(temp!=0xf0) //按键扫描 { delay500us(20); //消抖动 temp = P1; if(temp!=0xf0) { P1=0xfe; temp=P1; weiyi(); if((temp0xf0)!=0xf0) { switch(temp) { case 0xbe: m[0]=9; break; case 0xde: m[0]=8; break; case 0xee: m[0]=7; break; case 0x7e: //除号键 clear(); n=4; break; default: