Composer组态论文：基于通用组态软件的网络智能前端的研究与实现.docVIP

Composer组态论文：基于通用组态软件的网络智能前端的研究与实现 【中文摘要】在工业控制网络技术和嵌入式技术的发展促进下,智能数字仪表、传感器、执行机构等智能设备在工业控制中应用越来越广泛。通用组态软件作为当今工业控制中的重要组成部分,对工业自动化技术的发展有重要作用。智能前端是控制网络的基本组成单元,与成熟的组态软件技术和嵌入式技术结合,将使控制网络中的部分现场智能设备具有组态软件的部分功能或者全部功能。智能前端通过进行组态软件编写,能够实现对上位机的组态数据的下载、控制、监视等,将部分控制功能下移到现场设备。这一研究对控制网络的发展有深远的意义。本文分析研究了智能前端在不同控制网络中的应用,并简单介绍了通用组态软件的组态特点及基本思想,并对Composer组态进行了重点地了解。在嵌入式实时操作系统Linux下,采用C语言进行智能前端的软件部分的设计。该软件设计主要分为三部分:首先,采用模块化的设计思想进行通用组态软件功能模块的编写,建立功能模块的结构体数组及初始化条件,并编写部分算法函数;然后编写功能模块的调度运行模块,调用功能模块对应的算法函数,实现组态系统的运算控制功能;最后针对Composer组态,设计智能前端的通信模块,并对传输数据进行分析处理,与已有的功能码模型相联系,实现智能前端对Composer组态文件的下载运行,并可以通过上位机Composer对智能前端进行控制及监视。 【英文摘要】Under the promoting of the industrial control networking technology and the embedded technology, the intelligent digital meter, sensors, actuators and other intelligent devices are widely applicated in the industrial control. General configuration software has an improtant influence in the control system as a role in the development of industrial automation technology. By the intelligent front-end which is the basic unit of the control network, combined with the mature configuraion software technology, some field devices have the features of configuration software.By the simulation of the configuration software, the intelligent front-end has the function of download the configuration file, to shift some functions of control and montior to the filed devices.The research has far-reaching significance to the development of control network.In this paper, the applictions of intelligent front-end in different network control system were analyzed. The functions and characteristics of the general configuraion software were briefly described, and Composer was focused on to understand the meathod of configuration. Simulaiton software was designed in the embedded real time operating system Linux, using C progranme language. The software had done a work in three aspects. First, with the modular meathod, the simulation part had established the model structure array and initial