PEC材料工程英语证书考试-材料处理词汇.docVIP

PEC材料工程英语证书考试-材料处理词汇 Bag molding: A process in which plastics are molded into curved shapes by applying fluid pressure through a flexible cover that forces the material to be molded against a rigid die. Co extrusion blow molding: A process for the extrusion of multilayer products using extruded multilayer tube (parison) material centered in the mold. The mold is closed and gas pressure is used to expand the parison to fit the mold cavity. Composite: A material or materials system composed of a mixture or combination of two or more micro constituents or macro constituents that differ in form and chemical composition. Compression Molding: The compression molding process uses matched steel molds to compress a weighed charge of sheet molding compound into a new and specific shape. Ditactic polymer: A polymer that contains two sites of stereoisomerisms in the main chain of the configurational base unit. Elastoplastic: An elastomer that contains transient cross links, unlike most elastomers; it softens when heated for processing and becomes solid yet maintains its elastic behavior upon cooling. Elastoplastics are derived from polyolefins, polyurethane, polyesters and styrene copolymers. Elastoplasticity: The state exhibited by a material that has deformed both elastically and plastically. Extrusion blow molding: A method of processing polymers in the form of an open-end tub surrounded by a mold. The tube is used to increase air pressure to expand the material to fit the mold. Fiberglass: Used to reinforce and/or strengthen plastics. Hydro plasticity: The occurrence of plastic behavior. Injection molding: A process where molten plastic is injected into a mold. About 60% of all plastics processing machines are injection molding types. LPMC?: A low pressure molding compound, similar to sheet molding compound (SMC), but is moldable at pressures around 100 lbs/psi. Micro moulding: An emerging technology that takes injection molding technology down to a smaller scale. Mold 24i: