PEC化学工程英语证书考试-化工技术术语解释.docVIP

PEC化学工程英语证书考试-化工技术术语解释 Gas Volume The amount of air or gas intake in a particular time unitm3/min、CMM：gas volume per1 minutem3/h、CMH：gas volume per1 hourm3/min、CFM：gas volume per min = cubic feet (used often in America)?　　　　　　　　　 1f3/min＝0.0283m3/minNm3/min：gas volume under normal conditions (0℃, humidity 0%, intake absolute pressure 760mmHg)Convert into the gas temperature. Calculation is belowQt：converted gas temperature t℃ gas volume?QN：requested gas volume under normal conditions Static Pressure mmAq：A unit shown in height when the water pumped in or up?Aq=Aqua (water) abbreviation. Waterspout in millimeters (written as mmH2O)?inH2O：If not in millimeters, written in inches. (used often in America)1 inch＝25.4mmPa：Pascal (International unit for measuring pressure)1mmAq＝9.80665Pakgf/m2：1kgf/m2＝1mmAqbar：bar (European unit for measuring pressure)1bar＝10.197mAq、1mbar＝10.197mmAq Shaft Power The measure of power used at the shaft of the fan. Shaft power is measured in kW. Revolution Speed rpm、（R/M）、min-1：revolution per 1 minute Gas Specific Weight kg/m3：Weight per unit volume of gasGenerally1.2kg/m3 is most common under normal conditions (20℃, relative humidity 65%, and absolute pressures 760mmHg)?The specific weight of the gas changes due to temperature variations.The change in the specific weight of the gas due to temperature is calculated as follows.：Specific weight of gas at temperature t℃ of gas kg/m3：Specific weight of gas in 0℃ temperature of gas kg/m3 Conversion affected in specific weight volume performance All the performance labels in the fan catalog (capacity chart) are displayed by the normal atmospheric?conditions. Therefore, specific weight fbecomes 1.2kgf/m3.Usually under general atmospheric condition there is no problem but when specific weight of the gas differs by?a large amount it is necessary to refer to the capacity range chart.This conversion is calculated as follows(1)Static PressureSSp＝The actual static pre