压电陶瓷轮胎发电机的设计_英文_.pdfVIP

17 6 Vol.17 No. 6 2009 6 Optics and Precision Engineering Jun. 2009 11 1004-924X( 2009) 06-1327-06 廖海洋, 钟正青 ( 重庆大学光电学院新型微纳器件与系统技术国家重点学科实验室, 重庆400044) : ( TPMS) , , PZT5 , , (FEA) , ANSYS 11. 0 , , , 40 mm @ 15 mm, 15 Hz , 5 LA, 5 V 40 , TPMS 30 LW, 35 mW, 30 s , 150~ 350 LW, 50 mW : 轮胎发电机; 计算机仿真; 压电换能; 有限元法 :TM 31 :A Design of piezoelectric power generator in tire LIAO Ha-i yang, ZHONG Zheng-qing (NationalKey Laboratory of Fundamental Scienceof Micro/NanoDeviceand SystemTechnology, Departmentof OptoelectronicEngineering, Chongqing University,Chongqing 400044, China) Abstract: A novel power generator in the tire which is applied in a wireless Tire Pressure Monitor Sys- tem( TPMS) was designed. The piezoelectric convertor constructed b ybender arrays was merged to the inner surface of a tire to transform the mechanical deformation into the electric power and suppl to the sensors of TPMS. A Finite Element Model(FEM) for the convertor was established based on the second piezoelectric function and the piezoelectric convertor with different sizes was analyzed b 2 ANSYS 11. 0 in a transient method. Then, a target of 6 cm was selected to observe its characteristics, and the effective current is 5 LA. As the wireless sending component needs 10 mA ever y30 s, an ar- ra ywith 40 piezoelectric convertors was used in the generator and a power conditioning circuit with a multiple path charge coupling module was also designed. Experiments show that when the frequenc of tire rotation is 15 H z, the average power through the