毕业论文--虚拟信号发生器的研究与设计.doc

安徽建筑工业学院 毕业设计（论文）PAGE 62 - 安徽建筑工业学院 毕业设计(论文) 课 题： 虚拟信号发生器的研究与设计 专 业： 自动化 班 级： 一班 学生姓名： 曹红光 学 号： 07210030110 指导教师： 赵为松 摘 要 本文仅就基于LabWindows/CVI虚拟信号发生器进行设计，虚拟信号发生器利用LabWindows/CVI提供的软件平台以及强大的函数库，通过简单的单片机MCU+DDS就可以产生频带宽，精度高，幅值、相位和频率连续可调的波形，借助PC机的网络传输功能可实现网络控制和信号处理。基于LabWindows/CVI的虚拟信号采集卡利用C8051F020微处理器内的A/D通道及I/O端口完成虚拟信号采集，放大处理和数据传输任务，对信号的处理和显示可由PC机来完成或由网络控制，减少硬件的开支，易于实现自动测控。最后，在对本文系统进行全面测试，结果表明本方案可行，具有较大的通用性。 通过虚拟信号发生器的设计，阐述利用labwindows/cvi进行虚拟仪器设计的方法、步骤和实现技术，并展望虚拟仪器的广阔应用前景。利用其软件开发平台，按步骤阐述了虚拟信号发生器的设计和实现过程，最终实现了信号发生器的设计，该信号发生器可以选择波形以及幅值和频率。更能可以由用户根据需要自行设计和扩展，人及界面友好。关键词：信号发生器；虚拟仪器；labwindows/cvi AbstractThe content of this paper is about virtual function signal generator which is based on LabWindows/CVI and digital signal processor. It includes designing the structure of virtual signal generator which is based on LabWindows/CVI and digital signal processor, which includes hardware and software structure, designing digital signal capture board which is based on C8051F020 and giving network measure and controlling based on TCP/IP and signal processor. Use LabWindows/CVI software platform and powerful function library, simple MCU+DDS while can generate signal wave with wide channel, high precision and continuous adjustive swing, phase and frequence, the transmission function of network, Virtual signal generator can achieve network control and signal process. Used A/D channel and I/O ports which insides C8051F020 microprocessor, Visual capture signal board based on LabWindows/CVI finishes analog signal capture, ampliation and data transmission . Signal process and display can be finished by personal computer or MCU. And by network control we can reduce hardware expenditure and simply achieve autocontrol. Finally, through all-sided test, the result showing the project is fea