材料成型与控制技术专业毕业论文--40cr感应淬火工艺设计.docVIP

摘 要 随着中国经济的高速发展对模具工业提出了越来越高的要求，因而模具材料及其处理工艺的选择已在模具制造业中引起广泛的重视。模具热处理是保证模具性能的重要工艺过程。它对模具的制造精度模具的强度模具的制造成本模具的工作寿命有着直接的影响。根据模具的条件、，以及的综合，根据实际制订出合理的热处理工艺这样,能使模具达到良好的使用性能和寿命要求的同时，满足经济性要求，降低成本。Abstract With China's rapid economic development of the mold industry has ever-increasing demands, which mold material selection and heat treatment process of choice has been in the mold manufacturing industry has aroused widespread attention. Die die heat treatment is to ensure that the important properties of the process. Its manufacture of precision molds, mold strength, the manufacturing cost of mold, mold of his working life has a direct impact. Based on the analysis of mold materials and heat treatment and metallographic 40Cr steel on an experimental basis, in accordance with the conditions of mold material, the nature of the sample material, as well as the 40Cr microstructure heat treatment technology and comprehensive analysis, based on the actual formulation of a reasonable heat treatment process, and According to an analysis of experimental data. In this way, make good use of mold performance and life requirements. At the same time, meet the requirements of the economy and reduce costs.  Key words: mold material; heat treatment; heat treatment process; microstructure; 目 录 第一章 绪 论 - 4 - 1.1 模具制造概况 - 4 - 1.2我国模具的发展与现状 - 5 - 1.2.1 我国模具的发展 - 5 - 1.2.2我国模具制造业现状概况 - 5 - 1.3 模具选材 - 6 - 1.3.1满足工作条件要求 - 6 - 1.4、合金元素对钢性能的影响 - 8 - 1.5 实验目的及意义 - 11 - 1.5.1、实验目的 - 11 - 1.6 研究方案技术路线 - 13 - 第二章 40Cr感应淬火工艺参数 2.1 服役条件 - 15 - 2.1.1曲轴服役条件和性能指标 - 15 - 2.2 技术要求 - 15 - 2.2.1 调质技术要求 - 15 - 2.3 试样40cr 2.3.1.40Cr钢的物理性能 - 16 - 2.3.2.40Cr钢的化学成分 - 17 - 2.3.3.40Cr钢的调质处理 - 18 - 第三章 40Cr感应淬火工艺 - 24 - 3.1 感应加热淬火工艺概述 - 24 - 3.1.1 主电路的主要设计技术参数 - 28 - 3.2 感应加热淬火技术的优点与不足 - 29 - 3.3感应加热电源技术发展现状与趋势 - 34 - 3.4 感应加热淬火技术的发展方向 - 34 - 3.4.1 感应加热淬火技术的发展 - 34 - 3.4.2 新型感应加热淬火技术 - 35 - 3.5 感应加热淬火技术常见质量问题及产生原因 - 38 - 第四章 40Cr钢的金相实验 - 43 - 4.1、金相试样的制备 - 43 - 4.2 组织观察分析 - 45 - 第五章 热