毕业论文--永磁选矿机设计.docVIP

摘 要 振动筛是选煤厂用的最多的设备之一，主要用于煤的准备筛分以及最终筛分用，但是振动筛又是维修量比较大的设备。随着设计的逐渐完善，自定中心园振动筛能够很好的解决这一问题。本文主要介绍振动筛在选煤厂中的意义以及振动筛的发展现状，描述了本次设计型自定中心园振动筛设计CIRCULAR MOTION VIBRATION SIEVE OF AUTO CENTER ABSTRACT Vibration sieve is one of the most widely used devices in Coal Preparation Plant. Mainly used in coal preparation and the final screening with screening, But the vibrating screen is larger than the maintenance of equipment. With the gradual improvement of the design ，circular motion vibration sieve of auto center could well solve this problem. This article mainly introduced that vibration sieve in Coal Preparation Plant significance as well as vibration sieve development present situation, described this time has designed circular motion vibration sieve of auto center design computational method basis and the step, as well as the main vibration sieve parts choice and the comparison, and showed this design characteristic. Including the classification and characteristics of vibrating screen and determination of design; on the movement of materials analysis, Dynamic analysis of vibration sieve and kinetic parameters calculated, rational design of the structure vibrating screen size; carried out such eccentric Vibrator design and calculation, including the original design parameters, motor design and verification; were the main components of the design and calculation, calculation and check of belt design, spring design calculation, shaft strength calculation, bearing selection and calculation , then the equipment maintenance, installation, lubrication and seal design. KEYWARDS：vibration sieve，auto center，design basis  目录 摘要 I ABSTRACT II 1绪论 1 1.1 筛分的概念 1 1.2 筛分设备的作用 1 1.3 筛分作业的分类 1 1.4 筛分机械设计的意义 2 1.5振动筛设计的原则 3 1.6筛分机械研究的现状 3 1.7 将来的发展趋势 4 2目的依据及说明 4 2.1 自定中心园振动筛设计的目的 4 2.2 设计的依据及参考资料 5 2.3 设计的有关说明 5 3工艺参数的选择与确定 5 3.1 筛面长度及宽度的确定 5 3.2 生产率的确定 5 3.3 振幅和频率的选择 6 3.4 筛面倾角的选择 8 4动力学分析及参数计算 9 振动筛动力学基本理论 9 4.1 参振重量及参振质量的计算 11 4.2 主弹簧刚度计算与选择 12 4.3 激振器偏心质量及其偏心距的验算 13 4.4重心计算 15 5