某煤矿井下采区供电系统设计---煤矿井下采区电气设备安全运行毕业设计说明书.doc

摘 要本设计初步设计了煤矿地面35kV变电站的设计。其设计过程主要包括负荷计算、主接线设计、短路计算、电气设备选择、继电保护方案、变电所的防雷保护与接地等。通过对煤矿35KV变电站做负荷统计，用需用系数法进行负荷计算，根据负荷计算的结果确定出该站主变压器的台数、容量及型号。用标幺值法对供电系统进行了短路电流计算，为电气设备的选择及校验提供了数据。根据煤矿供电系统的特点，制定了矿井变电所的主结线方式、运行方式、继电保护方案。其中35KV侧为全桥接线，6KV主接线为单母分段。两台主变压器采用分列运行方式。并根据电流整定值以及相关数据的校验，选择了断路器、隔离开关、继电器、变压器等电气设备。关键字：负荷计算; 变电站; 继电保护;运行方式Abstract The design of the preliminary design of mine surface substation design35kV.The design process mainly includes the load calculation, the main wiring design, short-circuit calculation, equipment selection, the schemes of relay protection, substation lightning protection and grounding. The mine through35KV substation load statistics, with the required coefficient of load calculation, according to the load calculation results identify the station, the number of main transformer capacity and models. Use of per-unit value method of power supply system for short-circuit current calculation, for electrical equipment selection and validation provides data. According to the characteristics of coal mine power supply system, developed mine substation main wiring mode, operation mode, relay protection scheme.The35KV side for the whole bridge connection,6KV main connection to single parent segment. Two main transformer in operation. According to the current setting value and associated data check, choice of circuit breaker, isolating switch, relays, transformers and other electrical equipment.Keywords: Load calculation; Transformer substation; Relay protection; Operation mode目录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc326834673 摘 要 PAGEREF _Toc326834673 \h I HYPERLINK \l _Toc326834674 Abstract PAGEREF _Toc326834674 \h II HYPERLINK \l _Toc326834675 1绪论 PAGEREF _Toc326834675 \h 1 HYPERLINK \l _Toc326834676 1.1某煤矿采区原始资料： PAGEREF _Toc326834676 \h 1 HYPERLINK \l _Toc326834677 1.2采区机电负荷一览表： PAGEREF _Toc326834677 \h 2 HYPERLINK \l _Toc326834678 1.3采区巷道长度： PAGEREF _Toc326834678 \h 3 HYPERLINK \l _Toc326834679 1.4采区供电系统示意图 PAGEREF _Toc326834679 \h 3 HYPERLI