钢骨钢筋混凝土建筑结构施工实务手册之研究.pdfVIP

鋼骨鋼筋混凝土建築結構施工實務手冊之研究 陳正誠 國立台灣科技大學營建工程系教授 陳生金 台灣營建研究院院長 馬道奇 瓦當土木技師事務所技師 摘要 國內自 921 地震後，採用鋼骨鋼筋混凝土 (SRC)結構物之建築比率大為提昇， 由於 SRC 結構使用鋼骨與鋼筋混凝土兩種不同構 材，使得兩構材間配筋及混凝土 澆置施工之困難度更高，不僅設計者須對 SRC 結構之細部有深入之瞭解，施工品 質之確保亦為重要關鍵，因此為確保結 構物之耐震能力，建立系統化之施工中結 構專業檢查機制乃為當務之急。 本計畫參考美國 IBC 2000 特別監造制度、日本中間檢查制度及國內耐震設計 規範草案之耐震工程品管，建立國內施 工中結構專業監造制度，並針對國內常見 之 SRC 結構施工問題，制定施工中結構專業檢查項目及檢查表，作為 SRC 施工 中結構專業檢查作業之參考。 Abstract Since the “921 Earthquake”, the ratio of buildings using SRC has drastically increased. As SRC calls for the use of two different kinds of construction materials, namely, a steel skeleton and RC, higher difficulty would be encountered in aspects of steel bar arrangement and concrete pouring between these two materials. To cope with this trend, the designer needs to acquire deeper knowledge about the details of the SRC structure and on the other hand, the assurance of the construction quality is also a key factor. To ensure the seismic strength of the structure, it is imperative to establish a systematic professional inspection mechanism for the structure during the construction. By making reference to USA’s IBC 2000 special inspection system, Japan’s in-duration inspection system, and the seismic work QC in the domestic seismic design specification draft, this Plan was prepared in establishing the domestic in-duration structure professional inspection system. Aiming at the frequent construction problems with the SRC structure in the local market, the in-duration professional structure inspection items, and a checklist has also been formulated for use as the reference of profession