毕业设计（论文）--基于PLC的机械手控制系统的设计.docVIP

本科生毕业论文（设计） 题 目： 基于PLC的机械手控制系统的设计 姓 名： 邓 宇 学 院： 电气与信息工程学院 专 业： 自动化 班 级： 芙蓉自动化0902 学 号： 指导教师： 敖章洪 完成时间： 2013-2-16 2013年2月16日 基于PLC的机械手模型控制系统的设计 摘 要 在工业生产和其他领域内，由于工作的需要，人们经常受到高温、腐蚀及有毒气体等因素的危害，增加了工人的劳动强度，甚至于危及生命。自从机械手问世以来，相应的各种难题迎刃而解。 在本设计中介绍了国内外机械手研究现状及PLC的研究发展趋势，描述了机械手PLC的机械手MCGS在机械手控制系统中的应用。利用组态软件MCGS设计了机械手模型控制系统监控界面，提供了较为直观、清晰、准确的机械手运行状态，进而为维修和故障诊断提供了多方面的可能性，充分提高了系统的工作效率。 关键词：机械手；PLC；MCGS Design of Manipulator Model Control System based on PLC Abstract In industrial production and other domains, Because of the demands of the work, people were usually subjected to endanger of heat, decay and poisonous air etc. factor, these factors increased the strength of workers labor, even endanger life. Since the manipulator was born, the various difficult problems were easily solved. In this design the present condition of research about domestic and international manipulator and development trend of research concerning PLC were introduced. The principle of work and the process of action’s realization of manipulator control system were described. The design of manipulator model control system based on PLC was researched and MCGS’s application in the manipulator model control system was researched. The interface of supervision for the manipulator model control system was designed by MCGS. An intuitive, clear and accurate manipulator operating state was provided. And then various possibilities for maintain and breakdown’s diagnosis were provided, the work’s efficiency of system was fully elevated. Key words: manipulator; PLC; MCGS 目 录 摘 要 Ⅰ Abstract Ⅱ 第一章 绪 论 1 1.1 课题研究目的及意义 1 1.2 国内外机械手研究概况 1 1.3 课题研究的内容 2 第二章 机械手控制方式的选择和可编程序控制器简介 3 2.1 机械手控制方式的选择 3 2.1.1 控制方式的分类 3 2.1.2 PLC与工业控制计算机（IPC）和集散控制系统（DCS）的比较 3 2.1.3 机械手控制方式的选定 4 2.2 可编程序控制器简介 5 2.2.1 PLC的结构……………………………………………………………