H13钢表面高温磨损性能的比较研究.pdfVIP

H13 钢表面高温磨损性能的比较研究/尹小定等 ·11 · * H13 钢表面高温磨损性能的比较研究 1 2 1 3 3 尹小定 ，张 诤 ，程洪涛 ，王社斌 ，余春燕 (1 江西蓝天学院瑶湖校区制造系，南昌330098 ；2 江西理工大学南昌分校机电系，南昌 330013 ； 3 太原理工大学材料科学与工程学院，太原 030024) 摘要 用直流磁控溅射方法在 H13 钢和氮化 H13 钢表面沉积了 CrAlN 薄膜。用 SEM 观察薄膜表面，并对其膜厚进 行了检测，获得其平均厚度为 4.8µm；用 M-400-H1 测得随炉 Si 片上薄膜显微硬度为23.7GPa；用 THT07-135 摩擦磨损试验 机在 600℃条件下分别对 H13 、氮化H13+CrAlN 和 H13+CrAlN 3 种表面进行干摩擦磨损试验，获得如下结果：材料的表面 摩擦系数为 0.61 ～0.96，氮化H13+CrAlN 和 H13+CrAlN 高温摩擦条件下的表面耐磨性分别是H13 钢的 1.25 倍和 7 倍。 关键词 H13 钢 磨损 摩擦 Comparative Study on Tribological Behavior of H13 Steel at High Temperature 1 2 1 3 3 YIN Xiaoding , ZHANG Zheng , CHENG Hongtao , WANG Shebin , YU Chunyan ( 1 Jiangxi Blue Sky University , Nanchang 330098;2 Department of Mechanical and Electrical Engineering, Jiangxi University of Science and Technology, Nanchang 330013;3 College of Materials Science and Engineering, Taiyuan University of Technology, Taiyuan 030024) Abstract In order to improve the wear resistance of H13 steel, magnetron sputtering is applied in the paper ，in which three surface properties of H13 are to draw comparison. CrAlN films are deposited on surface of H13 steel and nitrided H13 steel, respectively. The micrographs of films are detected by SEM and the average thickness of coatings is 4.8µm. Microhardness of films deposited on silicon patchs is 23.7 GPa. Sliding friction and wear investigations are performed for three kinds of specimen s