(机电系)组合式专用铣齿机床的毕业设计.doc

摘要 本文是研究组合式专用铣齿机床的构成及其工作原理。从其构成特点开始分析与其他专用机床和普通机床相比的优点，全面分析其机械结构和工作原理。对其工作原理与公式进行了详实的调查和分析。运用了AUTOCAD.UG等软件对其零部件的设计进行进一步分析说明；并且对于铣齿机床上的铣齿刀具的选择进行了详细的分析，给出了指型刀架的主要性能参数。对其零部件的选用进行了精心的挑选，使其工作性能更佳。进一步突出组合式专用铣齿机床的优势。 通过本次对组合式专用铣齿机床的探讨，了解了其零部件的基本分析、加工的全面内容；掌握了组合铣齿机床的构成及工作原理，综合运用了所学的机械知识，加深了对大学所学专业课程的理解，为今后利用所学知识，在工作中解决具体问题打下了坚实的基础。 关键词：组合机床 加工原理 铣齿刀具 Abstract  This article is dedicated milling machine of modular composition and how it works. Starting from composition analysis and other special characteristics of machine tools and the advantages compared to general machine tools, a comprehensive analysis of the mechanical structure and working principle. Its working principle and the formula of the detailed survey and analysis. Use of its components AUTOCAD.UG design software such as further analysis shows that; and milling machine for milling cutters on the choice of a detailed analysis, given that the main performance parameters of type knife. The selection of its components were carefully selected to make it work better performance. Further highlight the combined advantages of dedicated milling machine. ???Through this special milling on the combination of tools to understand the basic analysis of its components, processing the full contents; mastered the combination of milling machine tool structure and working principle of the integrated use of the school of mechanical knowledge, deepen professional courses of the universitys understanding for the future use their knowledge to solve specific problems in their work has laid a solid foundation. Key words: combination milling machine Machining principle Milling cutters 目次 1 绪论 5 1.1毕业设计研究的意义及目的 5 1.2组合机床简介 5 1.2.1组合机床的组成 5 1.2.2组合机床的特点 6 1.3组合机床的发展概况 6 1.4齿轮加工机床概述 6 1.4.1各种类型齿轮加工机床 6 1.4.2铣床 6 2 机床结构方案制定 7 2.1组合式专用铣齿机床 7 2.1.1机床的组成及配置 7 2.1.2机床的技术规格 7 2.2组合式专用铣齿机床结构 7 2.2.1机床结构特点 7 2.2.2 机床的冷却系统 8 2.2.3机床的润滑系统 9 2.2.4机床的安全维护 10 3 机床部件设计选型 11 3.1通用部件简介 11 3.1.1组合机床通用部件规格、型号及其配套表 11 3.2通用部件计算选型 1