基于单片机的红外遥控系统的应用与制作.doc

摘 要 随着社会的发展、科技的进步以及人们生活水平的逐步提高，各种方便于生活的遥控系统开始进入了人们的生活。传统的遥控器采用专用的遥控编码及解码集成电路，这种方法虽然制作简单、容易，但由于功能键数及功能受到特定的限制，只实用于某一专用电器产品的应用，应用范围受到限制。而采用单片机进行遥控系统的应用设计，具有编程灵活多样、操作码个数可随便设定等优点。 本设计主要应用了AT89S52单片机作为核心，综合应用了单片机中断系统、定时器、计数器等知识，应用红外光的优点。遥控操作的不同，遥控发射器通过对红外光发射的控制来区别不同的操作。遥控接收器通过对红外光接收的识别，判断出控制操作，来完成整个红外遥控发射、接收过程。 其优点硬件电路简单，软件功能完善，性价比较高等特点，具有一定的使用和参考价值。 关键词：单片机，红外遥控，中断，定时，计数 With the development of our society and the gradual improvement of science and technology, various kinds of help remote control systems have began to enter people’s life. The traditional remote controllers adopt special remote control code and decode integrated circuits, though this kind of method is simply and easily, it is only the practical application of some certain special electric equipments because of the counted functional keys is counted and the restricted function, so the range of application is limited. But the remote controllers which adopt the microprocessors have many advantages such as flexible operating and unceremonious manipulative keys. The design has used AT89C2051 microprocessor as core, integratively apply the interruptive system, timer , counter ,etc. mainly to design originally and also take the advantage of the infrared light. The remote control launcher distinguishes different operation through the control on the number of pulse. The remote control receiver judges control operation by adopting the number of pulse of the received infrared light to finish the whole launching and receiving course. Its advantage is that the hardware circuit is simple, the software is with perfect function, have certain use and reference value Keywords: MCU, Infrared remote control，Interrupt，Timing，Counting  目 录 第1章 引 言 1 1 1.2 红外遥控原理 2 实施方案 2 第2章 红外遥控系统概述 4 2.1 基于单片机红外遥控系统概述 4 2.2 本课题设计思路 5 2.3 设计方案 5 2.4 技术关键和技术指标 5 第3章 总体设计 6 3.1 总体方案 6 3.2 指令码的构成 7 3.3 红外遥控发射系统的设计 7 3.4 红外遥控接收系统的设计 8 3.5 红外编解码原理 9 3.5.1 指令码的调制 9 3.5.2 信息码的解调 9 第4章 硬件电路设计 11 4.1 AT89S52单片机芯片 11 4.1.