外文翻译原文--51单片机与PC机系统设计的串行口通信.pdfVIP

System Design of Serial Port Communication between 51 Single-chip Microcomputer and PC ZHU Jian-jun,Lin Shi-wei, Yu Jun ，Sun Lu-mei Jilin Institute of Chemical Technology Jilin 132022, China Phone ：+86 0432 3951815 Email ：zjj099@163.com Abstract ：The serial asynchronous communication is some difficulties in the process of developing this an efficiency data transfer method. In this paper system. downward machines use the MCS89C52 single chip II. Hardware Design of Serial microcomputer as the core unit device to design a Communication data acquisition from the Electronic Balance DT20K. The upward machines software which adopt the The serial port of MCS89C52 is full-duplex multithread technique and the serial communication universal receiver Transmitter UART. Data is mechanism technique can control the data acquisition transmitted through TXD while received from RXD. device effectively, provide a multiform observation Two buffers SBIUF, one is used to transmit, the about the data, overlook or see it in detail, and store other receive, occupy the same address. SCON and the data automatically in database. The system makes PCON, two registers with specific functions in the data acquisition and the system control more serial port, control the working mode and baud rate convenient and efficiency. The system works steady of serial port respectively.