标准养护室温湿度控制系统的设计毕业设计（论文）.docVIP

（ 二 〇 〇 七 年 六 月 摘要关键词: 单片机Abstract With the rapid development of in the social field of the survey technology and control technology in recent years.　As core part computer also unceasing development.　Because the microcontroller has high accuracy，intellectualization，digitization，and so on. It is very important to the real-time examination system and automatic control system. This topic research standard curing room temperature and humidity control the system which takes the microcontroller as the core computer application system. It is divided into temperature control and the humidity, This system can click the temperature of temperature sensor acquisition , A/D converters. 　Finally ，Pass on the digital signal to the icrocontroller.　When the temperature of LED show and standard temperature has deviation ，enables the air temperature through the heater to achieve the standard temperature.The humidity control has realized when in the room the air humidity is smaller than the standard air wet degree-hour. Design of the hardware is divided into seven parts, for example, display circuit，before temperature gathering to channel，keyboard electric circuit，control circuit，WDT repositions the electric circuit，control power circuit design. Uses the modular design method in the software design, realizes with the computer c language. The master routine circulates the way work, completes the initialization，keyboard scanning，data computation and so on. 　Has put display and the temperature o the severance. This system is very important to the situation temperature control，so it has a very good application value. Keywords: icrocontroller；A/D converters；temperature control；humidity control；C language 第一章 绪 论 1 1.1项目的目的和意义 1 1.2标准养护室温湿度控制系统的发展前景 1 1.3标准养护室温湿度控制系统简介 2 1.3.1标准养护室温湿度控制系统结构框图及组成 2 1.3.2标准养护室温湿度控制系统性能 3 1.4 系统功能设计及技术指标 3 1.4.1系统功能设计 3 1.4.2系统的技术指标 4 第二章 系统硬件设计 5 2.1单片机的简介 5 2.2基准电压源电路的设计 6 2.3温度采集前置通道电路的设计 7 2.3.1 温度传感器电路的设计 7 2.3.2前向通道放大电路的设计 8 2