基于DDS的幅度调制AM信号发生器设计毕业论文终稿.doc

结　论PAGE 基于DDS的幅度调制AM信号发生器设计 摘 要信号发生器发展到今天，在电子测试、电子设计、模拟仿真、通信工程中，扮演着一个相当重要的角色，有着相当广泛的应用，极大加快了电子测试与设计工作中的效率，在电子技术和信号仿真应用中已发挥了巨大的作用。本文主要介绍了基于DDS的信号发生器的设计情况。这是一个以MATLAB为核心来实现信号发生器的系统，该系统具有结构简单灵活，抗干扰能力强、产生频率较高、应用广泛等特点。为实现基于DDS的数字调制波，提出以调整指数控制字与频率控制字，通过查表得到所需数字序列的思想与方法，MATLAB仿真与样机实验表明该方法是行之有效的。依据时域和频域卷积定理对信号调制与解调过程进行了分析，并用MATLAB软件的快捷、方便、准确的特点对其过程进行仿真，得到了比较满意的结果。将其仿真的过程应用与理论和实验过程中，这样常有利于激发学生的学习兴趣和全面推进素质教育、创新教育。通过软件调试后，所要求的各种波形都能按要求实现。由于设计的时间短等原因，本次设计只是原理性的设计，要达到实用，还有许多的工作要做。由于经验不足，在设计中还有许多不足之处，需要进一步改进。关键词：DSP Builder，FPGA, D/A转换器，信号发生器,调幅THE DESIGN OF THE AM SIGNAL GENERATOR BASED ON DDS The Amplitude ModulationABSTRACTThe development of the signal generator today, plays a very important role in the electronic testing, design, simulation, and communications projects. It widely spread the application, speed up the electronic test; also it plays a huge role in the electronic technology and the application of the signal simulation. This article mainly introduced the situation of the design which based on the DDS signal generator. This is a system which based on MATLAB in order to realize the signal generation. This system is simple and flexible, the anti-jamming ability is strong, the frequency is high, and the application is wide.In order to realize the digital modulating wave based on the DDS, we proposed the adjusted indexes control word and the frequency control word, through the table look-up we can find the thought and the method of the digital sequence. The MATLAB simulation and the prototypical experiment indicated this method is effective. Through the analysis which based on the time domain and the frequency range convolution theorem of the signal modulation, and the simulation on MATLAB software which is convenient and accurate, we can get a quite satisfactory result. The process of the simulation and the experiment of the theory can commonly stimulate the students studying interest and the comprehensive advancement for all-around developme