调节阀简介.ppt

Main Product Type - Valve Model : 840H – 1/2/3 Stage DHC Application Anti-Cavitation Cavitation occurs in liquid process when local pressure fluctuations near the liquid vapor pressure result in the sudden growth and collapse of vapor bubbles (cavities) in downstream liquid. Cavitation often produces high levels of noise and vibration in the system. To avoid this cavitation problem, the right number of multi-stage trim design should be adopted Low-Noise High mass flow and/or pressure drop in compressible fluids like gas or steam is a major source of noise and accompanies vibration in the system. The right source treatment depends on the right multi-stage trim. CCI Drilled hole cage design provides noise attenuation in a modular design Model : Model : 840H – 1/2/3 Stage DHC Matrix of Standard Material Fluid Temp. Range Valve type Liquid, Steam, Gas -26~260℃ 840G/H (Non-corrosive) 　 　 Item Material 1. Body A105 or A216 WCB / A351 CF8M 2. Bonnet 3. Bonnet studs A193-B7 / A193-B8M 4. Bonnet nuts A194-2H / A194-8M 5. Seat (Hard) 410SS (Soft) (1) 316SS 6. Plug 410SS 7. Cage 410SS 8. Stem 410SS 9. Balance Cylinder 410SS 10. Packing Teflon 11. Bal. Seal Teflon Fluid Temp. Range Valve type Liquid, Steam, Gas 260~425℃ 840G/H (Non-corrosive) 　 　 Item Material 1. Body A105 or A216 WCB / A351 CF8M 2. Bonnet 3. Bonnet studs A193-B7 / A193-B8M 4. Bonnet nuts A194-2H / A194-8M 5. Seat (Hard) 410SS (Soft) (1) - 6. Plug 410SS 7. Cage 410SS 8. Stem 410SS 9. Balance Cylinder 410SS 10. Packing Graphite 11. Bal. Seal Graphite Fluid Temp. Range Valve type Liquid, Steam, Gas 425~565℃ 840G/H (Non-corrosive) High Temp. 　 Item Material 1. Body A217 WC6 / WC9 / C12A A182F11 / F22 2. Bonnet 3. Bonnet studs A193-B16 4. Bonnet nuts A194-7 5. Seat (Hard) A182 F11 (5) (Soft) (1) - 6. Plug A182 F11 (5) 7. Cage A182 F11 (6) 8. Stem Inconel 718 9. Balance Cylinder A182 F11 10. Packing Graphite 11. Bal. Seal Graphite Model : Model : 840H – 1/