高效风能增速机本科毕业设计.docVIP

本科毕业设计 论文 题目：高效风能增速机 2013年 5月 摘 要 随着化石燃料的日益减少，能源问题已成为关系国民经济发展和人类生存的重要问题，对可再生能源的开发和利用迫在眉睫。风能是一种干净的、储量非常丰富的可再生能源，它不会随着其本身的转化和利用而减少，可以说是一种取之不尽、用之不竭的能源。由于风力发电其环境效益好，风电场建设周期短，占地面积小，广泛受到各国的关注，我国也正在大力研究风力发电技术。 本文主要做了以下几方面的工作：首先，确定增速箱的机械结构。采用一级行星加上两级圆柱齿轮传动综合行星齿轮传动的小型化和圆柱齿轮的大传动比，按照所给定的工作环境变量确定齿轮副参数和传动部件的结构其次，利用回差分析理论分析侧隙对回差的影响和齿轮传动中可能出现的三类回差来源（齿轮本身的固有误差，装置误差，其它误差），并详细计算了各级传动中的回差的大小，检验结构精度分配的正确性，提出减小回差的措施。应用三维软件Pro/E建立增速系统模型，利用ANSYS有限元软件对关键零件进行强度分析。 Abstract With the fossil fuel is reduced, the energy issue has become the development of national economy and the important problems of human survival, development and utilization of renewable energy imminent. Wind energy is a clean, abundant reserves of renewable energy, it will not be reduced with its own transformation and use, can be said to be an inexhaustible, be inexhaustible energy. Because of its environmental benefits of wind power, wind farm construction cycle short, covers an area of small, widely concerned by the whole world, our country also is to study the wind power generation technology. This paper has done the following work : first, determine the mechanical structure of the speed increasing box. Large transmission adopts miniaturization and cylindrical gear planetary plus comprehensive planet two cylindrical gear transmission gear ratio, according to the given work environment variables determine the gear parameters and the transmission part structure secondly, using the return difference analysis possible effects of backlash on the return difference and gear in the three kinds of error sources inherent error, the error of gear device, other errors , and detailed calculations of the levels of transmission of the return difference size, validate the structure accuracy allocation, is proposed to decrease the error measures. Application of 3D software Pro\/E to establish the growth model of the system, analyze the strength of key parts by using the finite element software ANSYS. Keywords：wind power generation