电气工程及其自动化优秀毕业论文英文.docx

Real-Time Computer Level Control of a Water TankStudent: Sijun WuID:ate: April 2013University of GlamorganDissertation submitted in partial fulfillment for the BEng in Electrical and Electronic Engineering.Faculty of Advanced TechnologyDeclarationI understand the nature of plagiarism, and I am aware of the University’s policy on this.I declare that this dissertation is the result of my own independent investigation and that all sources have been appropriately acknowledged in the bibliography.Signature: Date:AbstractWith the development of the times, Control system is playing an increasingly important role in various fields. Water tank control system is a typical model of control system. Control of water tank can be used as the basis of research into more complex nonlinear system, It not only has a strong theoretical, belongs to the application of basic research, but also it with strong comprehensive. It contains control theory, intelligent control, fluid mechanics, and other disciplines. Peoples life and industrial production, and many other areas often involve liquid level and flow control problem, for example in Inhabitant domestic water supply, beverages, food processing and other industries the production process, we usually need to use the water tank, it need to maintain the appropriate level, neither too overflow cause waste, also cannot too little and cant meet the demand. So the liquid height is an important parameter of the industrial process control, especially in a dynamic state. By using suitable methods to detect the liquid level can control it can receive good effect.In this final project design, I duty is to design a water tank liquid level control system, which involves the dynamic liquid level control, the modeling of the control system, PID parameters setting. I will discuss using different control methods to achieve control require, for instance, Proportional controller, PI controller. I will discuss