智能识别系统设计 电子信息毕业论文.docVIP

智能识别系统设计（2）  智能识别系统设计（2）The Design of Intelligent Recognition System(2)  摘 要 　　 智能识别即是射频识别RFID（Radio Frequency Identification），它是一种非接触的自动识别技术，作为实体，它是利用无线射频技术对物体对象进行非接触式和即时自动识别的无线通信信息系统。 本课题研究的是智能识别系统的设计。射频识别系统由阅读器和应答器两部分组成。主要是实现阅读器和应答器之间的信息传送和能量传送。 Abstract The Intelligent identification is the radio frequency identification RFID (Radio Frequency Identification), which is a non-contact automatic identification technology, as an entity, It is making use of the wireless RF technology for the object for non-contact and instant recognition of a wireless communication system. This research is the design of intelligent identification system.Radio frequency identification system consists of two parts of the reader and transponder.It is mainly achieved between the reader and transponder information transfer and energy transfer. This article is divided into four sections.The first part mainly introduced the system composition, the principle of work, the characteristic and the prospect.The second part of a more detailed description of the radio frequency identification system design, including component selection indicators, reading the design of the circuit, the response of circuit design.The third part is a system of software design, including the principle of the entire software program to write, a reader program, transponder writing programs, and so on.The fourth part elaborated how the overall system does carry on the installment and the debugging, discovers question which the system debugging appears, after correction, writes the debugging result.At the end of the paper I has carried on the summary. Key words: Radio Frequency Identification reader transponder 目 录 摘要 I Abstract II 绪论 1 1 系统组成及其工作原理 1.1 系统的组成 1.2 系统工作原理 1.3 技术特点及优势 1.4 应用现状和前景分析 2 RFID硬件设计 6 2.1 系统设计 2.2 主要元器件 11 3 软件设计 3.1 单片机编程原理 3.2 系统工作流程 7 3.3 应答器编码程序 3.4 阅读器解码程序 4 系统调试 4.1 高频振荡器的检测与调整 4.2 高频功率放大器的检测与调整 4.3 应答器电路的检测与调整 21 4.5 问题分析及解决方案 22 结论 23 致