Adipala泵房及箱涵深基坑监测方案.docVIP

Contents 一.编制依据asis of compilation 1-1设计要求Design requirements 1-2技术Technical base 二.工程概况General situation 2.1场地概况 Site conditions 2.2工程地质及水文地质Engineering geology hydrogeology 2.3基坑支护设计Foundation Pit supporting system design 三.监测内容及原则要求 Contents of Monitoring and in principle 3.1监测目的purpose of Monitoring 3.2监测对象Object of Monitoring 3.3监测工作指导原则Guide principle for Monitoring 3.4监测要求requirements for Monitoring 四.监测点的布设Arrangement of Monitoring points 4.1监测点的布置原则Principles of arrangement of monitoring points 4.2监测点的布设Layout of monitoring points 五.监测方法Monitoring Method 六.监测周期及频率Monitoring period and frequency 七.监测控制标准Control standards for monitoring 八.数据处理及信息反馈Data processing and information feedback 九.信息化施工与险情预报Informatization construction and risk prediction 十.监测组织Monitoring Organization 十一.确保质量和安全技术措施Technical measures for ensuring quality and safety 十二.设备型号及附件清单List of equipment, models and accessories 十三.监测平面布置图及记录表格Monitoring floor plan and record forms 一、Basis of compilation 1.1 Design requirements According to the design drawings for 《pump house and culvert box Foundation pit support engineering》which designed by Hangzhou KindBO geotechnical engineering technology Ltd , design requirements are: to ensure the safety of Foundation pit construction, special monitoring program should be developed and strictly enforced in the Foundation pit excavation process. Identified monitoring programmes should be implemented in the general contractor and design review , construction must be guided according to accurately predict and feedback, if necessary, to modify the design, ensure construction schedule and safety. 1.2 Technical base 1《Foundation pit supporting construction drawings of pump house and culvert box》 2《Code for geotechnical engineering investigation》GB50021-2001 3《Code for engineering survey》GB50026-2207 4《Specification for deformation measurement of buildings》JGJ/T8-2007 5《Technical code for engineering of Foundation pit》DB42/159-2204 6《Construction technolo