毕业论文-某工业用酶制剂废水处理工艺设计.docVIP

学号: 毕业设计 （ 届） 题 目： 某生物工程有限公司 工业用酶制剂废水处理工艺设计 学 生： 学院（系）： 专 业 班 级： 校内指导教师： 专业技术职务： 校外指导老师： 专业技术职务： 摘要： Abstract：This design is one enzyme preparation water treatment. The degree of the design is in a preliminary phase. The main distinguishing feature of the enzyme preparation waste water is that it contains the massive organic matters, so it belongs to the high concentration organic waste water, therefore its biochemical oxygen demand is also high. The water which needs to treatment in the treatment plant is 1000, regardless of the specified future development. Various target in the raw waste water is: the concentration of COD is 15000mg/L, the concentration of SS is 500mg/L, the concentration of ammonia is 200mg/L. The wastewater could be treated to meet the third level of the national discharge standard. After the analysis, the quality of this processing water belongs to the waste water that easy biology degrade and not have the obvious poison, could use two levels of biological treatments to treat the water. First level of processing mainly uses the physical methods, which removes the suspended solids and the inorganic substance in the water.Second levels of processing mainly uses the biology methods, consists of UASB of demand oxygen biology methods and SBR of anaerobic oxygen biology methods, which could remove BOD, COD in the waste water. The entire technological process have the characteristics of lower investment, good treatment effect, easy technology process，using small area, running steady, and consuming lower energy. Keyword: Enzyme preparation waste water treatment High concentration of organic waste water UASB SBR 目录 1 总论 1 1.1工程概况 1 1.2设计资料 1 1.3设计依据 1 1.4设计内容及要求 1 1.5处理方案的确定 2 1.5.1基本工艺确定 2 1.5.2预处理工艺选择 2 1.5.3厌氧处理工艺选择 2 1.5.4好氧处理工