(毕业论文)路面开槽机及其轴承座.doc

路面开槽机及其轴承座 摘 要 随着我国数控技术的迅猛发展和广泛应用，在数控技术的基础下研制的路面开槽机也在现实生活中得到了广泛应用。开槽机主要用于沥青、水泥路面裂缝病害处治时的开槽作业，即通过六篇特制刀片快速将不规则裂缝整理成均匀的凹槽，形成新的结合面。工作中要让刀头能稳定的把不规则裂缝整理成均匀的凹槽，就得归功于开槽机内的决定灵活性的轴及决定稳定性的轴承座。所以轴和轴承座是开槽机内不可或缺的部分。 本课题为大家详尽的介绍路面开槽机的结构和机内轴承座设计，本文总的来说可以分为两个方面介绍。第一个方面，介绍开槽机重点轴承座，基于ANSYS的轴承座有限元分析，对轴承座零件进行分析，然后拟定工艺路线设计制造。第二个方面，介绍了路面开槽机，从整机各结构及刀头介绍开槽机，并且举了两类具体品牌开槽作为实例为大家详细说明开槽机的应用特点及即将广泛在实际生活中应用的原因。 关键字：开槽机，路面，轴承座，ANSYS Abstract With the rapid development of numerical control technology and widely used in our country, on the basis of numerical control technology developed under the pavement grooving machine has been widely applied in real life, too. Grooving machine is mainly used for asphalt and cement road surface crack defect treatment of slotting jobs, namely through six special blade quickly irregular cracks into uniform grooves, form a new joint surface. Can work to make the tool bit stable into uniform grooves, the irregular cracks will thanks to the decision of the slot machines flexible shaft and the stability of bearing seat. So the shaft and bearing seat is an integral part of the slot machines. This topic for everybody detailed introduction of pavement structure of grooving machine and machine housing design, this article introduced in general can be divided into two aspects. First, introduces grooving machine mainly bearing seat, bearing based on ANSYS finite element analysis, analysis of bearing parts, and then to design and manufacture process. The second aspect, the paper introduces the road grooving machine, from all the structure of the whole machine and cutting head is introduced grooving machine, and gives two kinds of concrete brand slot as examples for us specify the application characteristics and grooving machine is widely applied in the practical life. Keywords: groove-cutting machine, pavement, bearing block, ANSYS 目录 第一章 路面开槽机产品说明 5 1.1 名称介绍 5 1.2 适用范围 5 1.3 性能参数 6 1.4 结构特点 6 第二章 基于ANSYS的轴承座有限元分析 7 2.1 建立有限元模型 7 2.2 计算结果及分析 9