基于LabVIEW的呼吸机算法设计-TheDesignofVentilator.pdfVIP

The Design of Ventilator Algorithm Chunyan Meng Center of Computer, Taiyuan Normal University Taiyuan 030012,China lvshuyang@163.com Abstract: This paper designed one ventilator arithmetic. The system is available to various ventilation modes, depending on the on-off state of the proportional valve and the motor. The whole design dealt with the ventilation mode algorithm and the PID control algorithm in different layers. The ventilator for therapy is for the severely sick and asks for the ability to realize a variety of ventilations depending on the needs[1]. The algorithm of ventilator directly determines the ventilation modes and performance, so reliable ventilator algorithm design is the key technology. It is a guarantee to the performance of ventilator algorithm to configurate and simulate the software and the hardware of the ventilator flexibly when the LabVIEW based ventilator control system is at the prototype developing stage[2]. Key words: Ventilator Arithmetic ；PID control ；Ventilator 1. the LabVIEW based ventilator control system The system is available to various ventilation modes, depending on the on-off state of the proportional valve and the motor.The proportional valve, the motor with its driving circuit, and the sensor with its amplifying circuit in the system are practical physical devices, while the human-computer interface, the ventilation mode algorithm and the PID controller are fulfilled by running a LabVIEW program on two computers. The upper computer with the Window XP