AC20-107B复合材料飞机结构.pdfVIP

U.S. Department Advisory of Transportation Circular Federal Aviation Administration Subject: COMPOSITE AIRCRAFT Date: 9/8/09 AC No: 20-107B STRUCTURE Initiated by: AIR-100 Change: 1. Purpose of this Advisory Circular (AC). This AC sets forth an acceptable means, but not the only means of showing compliance with the provisions of Title 14 of the Code of Federal Regulations (14 CFR) parts 23, 25, 27, and 29 regarding airworthiness type certification requirements for composite aircraft structures involving fiber reinforced materials, e.g., carbon and glass fiber reinforced plastics. Guidance information is also presented on the closely related design, manufacturing, and maintenance aspects. The information contained herein is for guidance purposes and is not mandatory or regulatory in nature. 2. To Whom this AC Applies. The audience of this AC may include applicants, certificate/approval holders, parts manufacturers, material suppliers, maintenance, and repair organizations. 3. Cancellation. AC 20-107A, Composite Aircraft Structure, dated April 25, 1984, is cancelled. 4. Related Regulations and Guidance. The material contained herein applies to normal, utility, acrobatic, commuter, and transport category aircraft type certificated under Civil Aviation Regulations (CARs) 3, 4b, 6, 7; and 14 CFR parts 23, 25, 27, 29; and it is produced in compliance with 14 CFR part 21, §§ 21.125, or 21.143 as may be appropriate. The sections of 14 CFR, parts 23, 25, 27, and 29 applicable to each paragraph of this AC are listed in Appendix 1. Other supporting guidance relevant to the AC is also provided in Appendix 1. 5. General. a. The procedures outlined in this AC provide guidance material for composite structures, particularly those that are essential in maintaining the ove