基于AC轴回转工作台设计(偏重A轴).docVIP

AC轴回转工作台设计（偏重A轴） 摘要：本次毕业设计的题目是AC轴数控回转工作台设计。通过对数控回转工作 台的设计，使我们能够掌握机械设计的方法和步骤。本课题研究的主要内容包括：确定数控回转工作台的传动方案；驱动力计算及其他相关计算；零件设计与校核； 零件图的绘制与三维模型建立；绘制装配图及运动仿真。对于数控回转工作台的设计，首先，进行总体方案设计，传动方案采用齿轮传动和蜗杆传动；然后进行各零件的设计与校核，蜗杆与轴采用整体式结构；蜗轮与工作台采用螺钉连接；工作台的平衡通过止推轴承来保证；箱体由箱座、箱盖和顶盖组成，其中箱体上设计了圆台和加强筋；最后，对各零件进行装配。数控机床的圆周进给由回转工作台完成，回转工作台可以与X、Y、Z三个坐标轴联动，从而加工出各种球、圆弧曲面等。回转工作台可以实现精确的自动分度，扩大了数控机床加工范围。目前，数控回转工作台主要用于数控镗床和铣床。随着数控技术的应用越来越广泛，数控回转工作台的应用已成为历史的必然。 关键词：数控回转工作台；齿轮；蜗杆；箱体；建模 Design of CNC rotary worktable Abstract：The graduation project is the subject of design of CNC rotary worktable.The main content of this research include: determining the transmission scheme of CNC rotary worktable; driving force calculation and other calculations; part design and verification; part and three-dimensional mapping model; assembly drawing and motion simulation.NC rotary worktable for the design, first of all, the overall design, use of transmission scheme and worm gear drive; then each part of the design and verification, the whole worm and shaft structure; worm screw connection with the worktable; Balance worktable by thrust bearings to ensure; box from the box seat, lid and cover, of which the box on the design of the round table and strengthen the tendons; Finally, the parts for assembly.The circumference of CNC rotary worktable by the completion of the feed, rotary worktable with X, Y, Z three axis coordinates to be processed into a variety of balls, such as circular surface. Precision rotary worktable can realize automatic indexing, and expand the range of CNC machining. Currently, the NC rotary table CNC boring and milling machines are mainly used. With more and more widespread application of CNC technology, CNC rotary worktable applications has become a historical necessity. Keywords: NC rotary worktable; gear; worm; box; modeling 1 绪 论 1.1本课题的学术背景与实际意义 近年来，随着我国国民经济的迅速发展和国防建设的需要，对高档数控机床提出了急迫的大量需求。机床制造业是一国工业之基石，它为新技术、新产品的开发和现