研究的可靠性,滑动轴承支撑斜盘式轴向柱塞泵型水液压外文翻译、毕业外文文献翻译、中英文翻译.docVIP

Research on the reliability of sliding bearing support in a swash-plate type axial piston water hydraulic pump Yin F.L., Nie S.L. College of Mechanical Engineering and Applied ElectronicsTechnology Ruan J. Logistics department of the 92962th army Peoples Liberation Army of China Beijing University of Technology Beijing 100124, China yinfanglong89@163.com Ruan J. Logistics department of the 92962th army Peoples Liberation Army of China Beijing University of Technology Beijing 100124, China yinfanglong89@163.com Guangzhou 510700, China hlrj84@163.com Abstract—In this paper, two kinds of different sliding bearing support structure including a traditional cross-shaft and a semi-shaft are designed for a water hydraulic pump.The characteristics of the two sliding bearings in each structure are calculated. By comparison, it is found that the working conditions of the two sliding bearings, especially the pv value, in the semi-shaft support structure are near to be identical in the cross-shaft one, which will be helpful to prolong their service life. Based on the Stress-strength interference theory, a reliability calculation model of the friction pair between the shaft and sliding bearings is proposed. The analysis results indicate that the semi-shaft sliding bearing support is beneficial to largely raise the inherent reliability of the water hydraulic pump as well as the service life of the pump. Keywords—water hydraulic pump; sliding bearing; pv value;Reliability Ⅰ.Introduction Water hydraulic system is operated with raw water(pure tap water) substituting for mineral oil. Such systems are becoming more and more popular, especially in the fields of steel and glass production, nuclear power generation, coal and gold mining, food and medicine processing, ocean exploration, and underwater robotics.Compared with conventional mineral oil, raw water that acts as hydraulic fluid has several inherent advantages,including low operating cost, sound enviro