多层旅馆施工计算书.docVIP

目 录 1、绪论-----------------------------------------------1 2、结构布置及计算简图确定-----------------------------3 3、重力荷载及水平荷载计算-----------------------------5 4、框架侧移刚度--------------------------------------12 5、水平地震及风荷载计算------------------------------14 6、竖向荷载作用下框架结构的内力计算------------------28 7、横向框架内力组合----------------------------------39 8、框架柱与框架梁截面设计----------------------------53 9、楼板的配筋计算------------------------------------66 10、楼梯的配筋计算-----------------------------------77 11、参考文献-----------------------------------------83 12、致谢---------------------------------------------84 Abstract The purpose of the design is to do the anti-seismic design in the horizontal frames of axis 2. When the directions of the frames is determined, firstly the weight of each floor is calculated .Then the vibrate cycle is calculated by utilizing the peak-displacement method, then making the amount of the horizontal seismic force can be got by way of the bottom-shear force method. The seismic force can be assigned according to the shearing stiffness of the frames of the different axis. Then the internal force (bending moment, shearing force and axial force ) in the structure under the horizontal loads can be easily calculated. After the determination of the internal force under the dead and live loads, the combination of internal force can be made by using the Excel software, whose purpose is to find one or several sets of the most adverse internal force of the wall limbs and the coterminous girders, which will be the basis of protracting the reinforcing drawings of the components. The design of the stairs is also be approached by calculating the internal force and reinforcing such components as landing slab, step board and landing girder whose shop drawings are completed in the end. Keywords : frames, structural design, anti-seismic design . 主要参考文献 （1）《建筑结构可靠度设计统一标准》 GB50068-2001 （2）《建筑工程抗震设防分类标准》 GB50223-2004 （3）《建筑结构荷载规范》 GB50009-2001 （4）《混凝土结构设计规范》 GB50010-2002 （5）《建筑抗震设计规范》 GB50011-2001 （