基于DSP高速无刷直流电机控制使用直流环节电压控制外文翻译.docVIP

毕业设计/论文 外 文 文 献 翻 译 院 系 机电与自动化学院 专 业 班 级 电气工程及其自动化0801 姓　 名 黄 欢 原 文 出 处 中国土木水利水电工程学刊 评 分 指 导 教 师 蔡红娟 华中科技大学武昌分校 2012 年6月 22日 基于DSP高速无刷直流电机控制使用直流环节电压控制 金李康-华李明博伍中妍 Electric Power Components and Systems, 30:889–900, 2002 Copyright ? c 2002 Taylor Francis 1532-5008/ 02 $12.00 + .00 DO I: 10.1080/ 15325000290085190 DSP-Based High-Speed Sensorless Control for a Brushless DC Motor Using a DC Link Voltage Control KYEONG-HWA KIM MYUNG-JOONG YOUN Department of Electrical Engineering Korea Advanced Institute of Science and Technology Taejon, Korea A DSP-based high speed sensorless control for a brushless DC (BLDC) motor using a DC link voltage control scheme is presented. By operating the BLDC motor in a high speed range, the drive system can have a small size and be light weight at the same output rating. In the existing sensorless control schemes, the PW M technique is generally used as a speed control. However, since the PWM and inverter commutation cannot be performed independently, a significant commutation delay may exist in a high-speed region. On the other hand, using the DC link voltage control scheme, the inverter is operated with the squarewave of 120 ° conduction and the speed control is achieved by regulating the DC link input voltage of the inverter through the chopper. By using this technique,since the voltage control and commutation can be achieved independently, a commutating delay does not exist even in a high speed region. Also, the phase current can have a waveform similar to the rectangular wave and the terminal voltage is more e -cient to deal with in the position detection circuits. The practical implementation issues concerning the commutation delay in a high speed sensorless control are discussed. The whole control system is implemented on a BLDC motor using DSP TMS320C240 and the e?ectiveness is veried through the com