基于单片机实现的智能液位传感器毕业论文(设计).docVIP

智能液位传感器 摘 要 摘 要：介绍了压力传感器的应用，设计了智能液位传感器。此设计通过压力传感器测出液体的压力，输出0 - +5V的模拟电压通过ADC0804采集转换成数字量送入单片机处理，由RS232串口通信送到上位机，并显示出高度。此设计能完成0-1.5m高度的液位测量，能精确到厘米。此设计主要由压力传感器，单片机，ADC0804转换器构成。 关键词：智能液位传感器，单片机，AD转换器 Abstract：This article introduces the application of pressure sensor, and designs a intelligent level sensor. This design detects the liquid pressure through the pressure sensors, and it will send the voltage from 0 to 5V which is converted into digital quantity by the simulation ADC0804 acquisition to the SCM processing. Then the digital will be sent to the PC which shows the high by RS232 seri