外文翻译--基于ANSYS的金属齿轮与塑料齿轮固有振动特性的对比分析.docVIP

Analysis based on the ANSYS metal gears and plastic gears inherent vibration characteristics compared 姓名： 班级： Abstract: Using ANSYS software gear finite element model, modal analysis, the plastic gear gun and steel gear module .State of natural frequencies and mode shapes diagram, were analyzed. The conclusion for the dynamic design of gears and gear structure related equipment fault diagnosisOff basis.????Key words: plastic gear steel gear gun modal analysis of vibration characteristics0 Introduction The gear drive is the most important in the mechanical transmission drive gear transmission because of its high efficiency, compact structure, the transmission ratio stable and are widely used in engineering. Accelerated due to the development of high-performance engineering plastics, the proportion of the application process for plastic and steel, plastics in the field of mechanical engineering is increasing, the production of gear materials are no longer limited to metallic materials, has grown to the plastic gear. On the application and theoretical study of the plastic gears, and steel gear, late research time is also shorter, and domestic and foreign researchers on the understanding of the plastic gear performance and application very immature, but to imitate and improve [] on the basis of the steel gear. Therefore, the experimental study of plastic gear is necessary. Plastic material with Bo, the elastic energy, and thus has obvious noise reduction and vibration damping performance. In fact, for the transmission of power in terms of gear when the gear bodys natural frequencies and the frequency of exciting force is very close to the even drill the plastic material gear also have a resonance and noise [[2}}} 4321-437A. Therefore, during the plastic gear design, the vibration characteristics of the study is necessary. We use ANSYS software to gear finite element model, modal analysis, mode shapes and natural frequency of the plastic gears and alloy gear to prov