基于单片机的数控电流源毕业设计论文.doc

基于单片机的数控电流源设计 摘要 随着电子技术的飞速发展，电子设备越来越多，而电子设备要工作都需要有电源能够为其通电。性能好的电子设备，首先就离不开稳定的电源，电源的稳定度越高，电子设备机器外围条件越优越，设备的寿命就更长。而各种不同的电子设备所需要的供电电源不是统一的，所以，对于数控恒定电流ased on SCM of nc source current design Abstract As electronic technology in recent years, electronic devices and electronic equipment work will need to have the power of electricity. the performance of electronic equipment is first and foremost from a stable source of stability, the higher the external condition, an electronic device, machine equipment of the more, it will be long. And a variety of electronic equipment needed the supply of power is not unified, so for nc constant current research and development is very important. it is a constant pressure nc technology have a ripe, constant flow in the field, especially at a constant stream nc skills to development, performance nc current research and development is very important. This article describes a revivification of nc current design methods and systems to at89s51 monolithic integrated circuits to control, the button for the output, the current monolithic integrated circuits current take the tube, At the same time, and d a converter data communications port output of the current number of tier d a converter, d a converter will be converted to numbers measure for simulating after the output, run by a constant flow of electrical a steady output of electricity. d a converter adopt dac0832. This article provides nc current source of very high precision, a number of current trials, circuits, refining, simplicity, low cost, or useful value. Developing Keywords：umerical controlled current source; AT89S51; Digital-To- Analog conversion 毕业设计（论文）原创性声明和使用授权说明 原创性声明 本人郑重承诺：所呈交的毕业设计（论文），是我个人在指导教师的指导下进行的研究工作及取得的成果。尽我所知，除文中特别加以标注和致谢的地方外，不包含其他人或组织已经发表或公布过的研究成果，也不包含我为获得 及其它教育机构的学位或学历而使用过的材料。对本研究提供过帮助和做出过贡献的个人或集体，均已在文中作了明确的说明并表示了谢意。 作 者 签 名：　　 　 　　日　 期：　　 　 　　 指导教师签名：　　 　 　　 日　　期：　　 　 　　 使用授权说明 本人完全了解 大学关于收集、保存、使用毕业设计（论文）的规定，即：按照学校要求提交毕业设计（论文）的印刷本和电子版本；学校