连续Z字形布置防屈曲支撑的钢筋混凝土框架结.pdfVIP

连续 Z 字形布置防屈曲支撑的钢筋混凝土框架结 * 构拟静力试验研究 曲 哲 1 每田悠承 2 吉敷祥一 3 坂田弘安 2 和田 章 2 Zhe Qu, Yusuke Maida, Shoichi Kishiki, Hiroyasu Sakata, Akira Wada 1.中国地震局工程力学研究所 2.东京工业大学 3.大阪工业大学 Abstract A new buckling restrained braced frame system is proposed for reinforced concrete building structures, which is featured by the zigzag configuration of the braces and the corresponding connection details. The connection details tend to separate the vertical and horizontal components of force imposed by the braces to be resisted by independent structural components to make the behavior of the connection easier to estimate and control. The performance of the brace connection details was evaluated through cyclic load testing on 1/2-scale subassemblies of the proposed system, each of which consisted of a reinforced concrete part and a set of buckling restrained braces. To simplify the test control, the specimens were rotated
90 in the test and were loaded by two displacement controlled actuators. The test results show that the normal and the shear resistance of the gusset plate connection are essentially independent of each other. However, the rotation of the gusset plate with respect to the beam-to-column joint may result in non-uniform force distribution of the anchor bolts, the primary resistance for tensile force. At the same time, such rotation may also subject the concrete corbels, the primary shear resistance, to unfavorable tensile force. In addition, it is also confirmed that the buckling restrained braces performed well in the proposed system. Keywords ：buckling re