工业废水处理厂絮凝搅拌机的设计说明书.docVIP

摘要 搅拌机在搅拌设备中处于核心地位。在搅拌机设计及使用过程中，合理的选取搅拌机的结构，运动和工作参数，直接关系到搅拌质量和搅拌效率。完成絮凝经过的絮凝池(一般常称反映池)，井水除氟设备海扬，在净水料理中占据重要的名望。自然水中的悬浮精神及肢体精神的粒径分外微细。为去除这些精神平日借助于混凝的权谋，也就是说在原水中参与适当的混凝剂，经过充塞混和，使胶体安静性被坏(脱稳）并与混凝剂水介后的聚合物相吸附，使颗粒具有絮凝本能机能。而絮凝池的目的就是创造合适的水力条件使这种具有絮凝性能的颗粒在相互接触中聚集，以形成较大的絮凝体(絮粒)。因此，反应池设计是否确当，关系到絮凝的效果，而絮凝的效果又直接影响后续处理的沉淀效果。絮凝搅拌机是絮凝池机械搅拌的装置，它主要用于废水处理的搅拌过程。 本设计提到了反应池的结构设计，搅拌机的结构设计，电动机及减速器的选型，搅拌机支架设计，密封设计以及其工艺流程。在设计过程中，我们应该充分考虑桨叶距离絮凝池顶端、底端以及侧壁预留的距离，还有就是轴的密封问题。 关键词：The mixer is at the core position in the mixing equipment. In agitator design and use of the process, select the reasonable structure of the mixer, motion parameters and work, directly related to the mixing quality and efficiency of stirring. Accomplish flocculation pool (often called the flocculation after reflecting pool), water fluoride removal equipment HIYOUNG, occupy the important position in water purification cuisine. Suspended spirit and spirit of natural water body size is fine. To remove these spiritual weekdays by coagulation of trickery, that is to say in the appropriate coagulant in water, after full mixing, so that colloidal quiet is bad (destabilization) and phase adsorption and mixed polymer coagulant water after, the particles with flocculation performance. The flocculation pool purpose is to create appropriate waterpower condition makes this aggregation with flocculation properties of particles in contact with each other, to form a large flocs (flocs). Therefore, the reaction pool design is appropriate, in relation to the effect of flocculation, sedimentation and flocculation effect has direct impact to follow-up treatment. The flocculation mixer is flocculation pool mechanicalrabble device, which is mainly used for mixing process in wastewater treatment. This design to structure design reaction tank, the structure design of mixer, selection of motor and reducer, mixer stent design, seal design and its processes. In the design process, we should give full consideration to blade distance flocculation pool