气动系统节能设计及应用英文资料翻译.docVIP

英文资料 Design and application of energy-saving pneumatic system Pneumatic drive and control the production process automation and mechanization of the most effective means, but its working medium (air) and high manufacturing costs, energy efficiency, extremely low. Pneumatic system used to improve the economy, has become the must attention.On the pneumatic system, reducing gas consumption is the energy.Energy-saving pneumatic system from several aspects: (1) improve the gas supply system, pneumatic system to solve the energy problem, should improve the gas supply system, starting from the compressed air production, processing, transmission, distribution of the gas supply systemthorough consideration, taking comprehensive measures.Structure of different types of air compressors produce the same amount of compressed air, because of its efficiency vary, there are differences in energy consumption.Speed type of turbine air compressors efficiency is low, such as the free air compressed into 0.6MPa 10m3 of compressed air, by the displacement to 1000 m3 / h of the turbine air compressor production, energy consumption 1.77kW ? h.Produced the same amount and pressure of compressed air, such as the use of the same displacement piston compressor production, only the energy consumption 0.83kW ? h.Therefore, from the energy point of view of energy saving and air compressor air compressor type of the structure.In the choice of air compressor, the use of a perfect between-class multi-polar compressor cooling can save energy and improve efficiency.For example, two single stage compression ratio more than 15% energy saving, 3 second compression and energy-efficient compression ratio of 5% ~ 10%.Change the traditional design concepts, will focus on the whole plant by the large supply of compressed air compressor station, transforming the distribution of the pneumatic system in the plant near the area of multiple smaller air compressor gas more economical.For example,